Lockable Centrefeed Hand Towel Dispenser - 2Work - White

This dispenser is designed for 2Work centrefeed rolls. For optimal performance and fit, it is recommended to use rolls from the 2Work range.

To refill, unlock the dispenser with the provided plastic key, lower the front panel, insert a new centrefeed roll, and then close and lock the front panel.

The plastic key is specific to the lock mechanism. It's advisable to store the key in a safe and accessible place. Replacement keys may not be readily available and might require contacting the manufacturer or a locksmith if lost.

The dimensions are Width 235mm x Depth 230mm x Height 350mm.

The dispenser can be mounted on most solid wall types. Appropriate mounting hardware for your specific wall material (e.g., drywall anchors, masonry screws) should be used and may need to be purchased separately.

A plastic key is provided to lock the front of the dispenser, preventing unauthorized access to the paper towels inside. This is useful for security and inventory control.

Yes, the dispenser can be easily wiped down with a damp cloth. Mild soap can be used for cleaning, but avoid abrasive cleaners that could damage the white finish.

Ensure the front panel is fully closed and latched. Check the plastic key for damage and ensure it is inserted correctly into the lock.

Verify that a compatible 2Work centrefeed roll is being used. Check that the roll is loaded correctly and the paper feed is properly aligned within the dispenser. Ensure the roll is not jammed.

Ensure the dispenser is unlocked with the key. If the panel is stuck, check for any obstructions. Do not force the mechanism.