Best current price£919.94from B&Q
Shopping.co.uk recommended and popular offers
B&Q£919.94Visit shop B&Q - Hr006Gd203 Twin 40V Max Xgt Brushless Sds Max Rotary Demolition Hammer Inc 2X 2.5Ah Batteries
Visit shop6 offers from £919.94 - £2,088.95
View price history by clicking the chart icon.
The Makita HR006G is a professional-grade, high-performance cordless rotary demolition hammer designed for heavy-duty masonry, drilling, and chiseling tasks. Powered by a twin 40V Max XGT battery system to deliver 80V of raw power, it is ideal for contractors who require corded-like performance without the tether of a power cable; however, users should note that the dual-battery requirement makes the tool heavier than standard single-battery rotary hammers.
| Model Part Number | HR006G |
|---|---|
| Brand | Makita |
No, the tool requires both 40V Max XGT batteries installed to provide the necessary 80V power for the motor.
The HR006G is rated for a maximum drilling capacity of 52mm in concrete.
No, this tool uses an SDS-MAX chuck, which is designed for larger bits and higher impact force.
Ensure your dust extractor is AWS-compatible, then follow the pairing instructions in your user manual to sync the tool and the vacuum via Bluetooth.
It reduces the motor speed when not under load, which lowers vibration and noise levels and helps with precise positioning of the drill bit.
Verify that both 40V XGT batteries are fully seated and charged. Both must be present to deliver the required 80V.
The AFT (Active Feedback Sensing) has likely triggered due to a bit jam. Release the trigger and remove the bit from the material before restarting.
Check that the bit is properly seated and not worn out. Ensure the handle is secure and not loose.
To set up the HR006G, insert two fully charged 40V Max XGT batteries into the rear housing. Ensure the SDS-MAX bit is inserted into the chuck until it clicks into place. If utilizing the AWS system, pair the tool with a compatible Makita wireless dust extractor by holding the pairing button until the light flashes blue. For maintenance, regularly clean the vents of dust buildup and inspect the chuck for debris that might hinder tool rotation. Periodically apply a small amount of grease to the shank of your SDS-MAX bits to maintain smooth operation and protect the internal hammer mechanism.
