Park Tool FR-6 Freewheel Remover
Best current price£21.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£21.99Visit shop Park Tool Freewheel Remover BMX Threaded Type FR-6
Visit shopeBay£21.99Visit shop All Offers
5 offers from £21.99 - £24.99
View price history by clicking the chart icon.
Park Tool FR-6 Freewheel Remover in Black£4.50 delivery£24.99Visit shop →
Park Tool FR-6 Freewheel RemoverFree delivery in 1–3 days£21.99Visit shop →
Product Information
Full details
The Park Tool FR-6 Freewheel Remover is designed for cyclists working on BMX and single-speed bikes, offering a durable solution for removing four-notch freewheels. Its key benefit is the thin-wall construction that allows removal without taking off cones and locknuts, simplifying the maintenance process. A potential caveat is its specific fit for 1.37 x 24 TPI threads and four-notch designs, requiring verification before purchase.
All features
| Model Part Number | 318835 |
|---|---|
| Brand | Park Tool |
Extended Product Information
FAQs
What type of freewheels does the FR-6 remove?
The FR-6 is specifically designed to remove four-notch BMX and single-speed freewheels that use 1.37 x 24 TPI threading.
Can I use this tool on a standard geared bicycle cassette?
No, the FR-6 is not designed for cassette-style freehubs found on most geared bicycles. It is specifically for the type of freewheels used on BMX and single-speed bikes.
How do I properly secure the tool during use?
You must hold the tool firmly in place against the hub using either an axle nut or a quick-release skewer. This prevents the tool from slipping while you apply leverage.
What is the 'thin wall construction' benefit?
The thin wall allows the tool to fit onto the freewheel without needing to remove the hub's cones and locknuts, simplifying the removal process.
What size wrench fits the tool's base?
The tool has a 1-inch base that fits a standard wrench or can be secured in a bench vise.
What is the warranty on the Park Tool FR-6?
The Park Tool FR-6 is covered by Park Tool's limited lifetime warranty.
How do I clean and maintain the FR-6?
Clean the tool with a dry or slightly damp cloth after use and store it in a dry location to prevent rust. Inspect the notches periodically.
Troubleshooting
Tool does not fit the freewheel.
Verify that the freewheel has four notches and matches the 32mm (inner) / 40mm (outer) dimension. Ensure the hub threads are 1.37 x 24 TPI. This tool is not compatible with all freewheel types.
Difficulty removing a tight freewheel.
Ensure the tool is held perfectly square and firmly in place with the skewer or nut. Apply steady, firm pressure rather than sudden jerks. Consider applying a penetrating lubricant to the freewheel threads and letting it sit before attempting removal again.
Tool feels loose during removal attempt.
Re-secure the tool using the axle nut or quick-release skewer. Ensure it is fully engaged with the freewheel notches and tightened appropriately. Check that the tool's base is seated correctly against the hub.
Notches on the tool or freewheel appear damaged.
Cease use immediately. Inspect both the tool and freewheel for damage. If the tool is damaged, it may need replacement. If the freewheel is damaged, further attempts could cause more harm. Contact Park Tool support if the tool is defective.
Pros and Cons
Pros
- Durable construction from heat-treated alloy tool steel.
- Thin wall design facilitates easier freewheel removal.
- Secure fit for specific four-notch BMX/single-speed freewheels.
- Versatile base fits common tools and vises.
- Designed to fit over larger axles up to 16mm.
Cons
- Specific design for four-notch freewheels; not universally compatible.
- Requires an axle nut or skewer to hold the tool securely during use.
- May not fit freewheels with different notch configurations or thread types.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the tool is clean and free from debris.
- Place the FR-6 freewheel remover onto the four-notch freewheel, ensuring a snug fit.
- Secure the tool firmly against the hub using either an axle nut or a quick-release skewer. This is crucial for applying effective leverage.
- Use a 1-inch wrench, bench vise, or a Park Tool SR-1/FRW-1 leverage tool on the tool's base for removal.
Compatibility:
- Designed for freewheels with four notches.
- Fits hubs with 1.37 x 24 TPI threads.
- Notches are approximately 32mm inside to inside and 40mm outside to outside.
- Fits over axles up to 16mm thread diameter, including most 14mm oversize axles.
Care:
- After each use, clean the tool with a dry or slightly damp cloth to remove grease and dirt.
- Store the tool in a dry place to prevent rust.
- Periodically inspect the notches for any signs of wear or damage.
- Avoid using excessive force that could damage the tool or the freewheel.