Best current price£8.03from eBay
Shopping.co.uk recommended and popular offers
eBay£8.03Visit shop Connect Volvo Electrical Multipurpose 2 Pin female Connector 10pc 37603
Visit shop8 offers from £8.03 - £11.39
View price history by clicking the chart icon.
This Connect Electrical Multipurpose 2 Pin female Connector set is designed for automotive and other electrical applications requiring a secure 2-pin connection. It offers a reliable replacement for OEM part number 9168792, providing durability and ease of use. The primary caveat is that it requires proper crimping tools for terminal installation. The set includes 10 female connectors, 4 terminals, and 4 seals, making it suitable for coolant temperature sensor, ABS sensor, and other multipurpose uses.
| Model Part Number | 37603 |
|---|---|
| Brand | Connect |
This connector is equivalent to Volvo OEM part number 9168792 and is primarily intended for specific Volvo applications, such as coolant temperature and ABS sensors.
The set includes 10 x Female 2 Pin Connectors, 4 x Terminals (part #37604), and 4 x Seals (part #37358).
Yes, you will need a suitable crimping tool to properly attach the terminals to the wires.
While designed for specific OEM replacements, they can be used for other multipurpose electrical applications provided the pinout and voltage/current requirements match.
The set includes 4 terminals and 4 seals, which is fewer than the 10 connectors. You may need to purchase additional terminals and seals separately if you intend to use all 10 connectors.
Properly seat the seal into the rear of the connector housing after the terminal has been inserted and locked into place.
The seals are designed to prevent moisture, dirt, and other contaminants from entering the connector housing and interfering with the electrical connection, ensuring long-term reliability.
Ensure the terminal is correctly crimped onto the wire using an appropriate crimping tool. Verify that the terminal is fully seated within the female connector housing.
Check that the terminal locking tab within the connector housing is engaged. If the housing is damaged, it may need replacement.
Ensure the seal is oriented correctly and that no debris is present in the connector cavity. A small amount of silicone lubricant can aid installation if needed.
Inspect the crimp on the terminal and the connection point. Ensure the wire itself is not damaged and that the connector is fully seated. Check for corrosion on the terminal contacts.
Setup: To set up these connectors, first ensure you have the correct wire gauge. Insert the wire into the terminal, then use a proper crimping tool to securely fasten the terminal to the wire. Be sure to crimp both the wire insulation and the conductor. Next, insert the terminal into the female connector housing, ensuring it clicks into place. Finally, slide the seal over the rear of the terminal and into the connector housing to create a watertight seal. Repeat for all connections.
Compatibility: This connector set is equivalent to Volvo OEM part number 9168792 and is suitable for applications such as Coolant Temperature Sensors and ABS Sensors. It is designed as a direct replacement for these specific uses.
Care: These connectors are designed for permanent installation. Avoid repeatedly connecting and disconnecting them to prevent wear on the terminal contacts. Keep the connector housings clean and free from excessive dirt or debris. If the vehicle is exposed to harsh elements, ensure the seals are correctly seated to maintain protection against moisture and corrosion.
