Sealey Hydraulic Scissor Jack - 700Kg

The Sealey Hydraulic Scissor Jack HSJ07 has a maximum lifting capacity of 700kg.

The jack can reach a minimum height of 139mm and a maximum height of 380mm.

This jack is best suited for smaller vehicles, trailers, or light-duty equipment with a weight not exceeding 700kg. Always check your vehicle's manual for specific jacking point recommendations and weight limits.

Insert the one-piece pumping handle into the jack and operate it vertically to raise the vehicle. To lower the vehicle, slowly turn the release valve counter-clockwise.

Yes, the jack is supplied in a tough carry/storage case to keep it clean and protected.

This jack is primarily designed for hobby users or as an emergency mobile jack. Its 700kg capacity and design are not intended for heavy-duty, professional garage applications.

Keep the jack clean and dry, store it in its case, and periodically inspect it for wear. Lubricate moving parts as needed. Avoid exceeding its weight limit.

Ensure the vehicle's weight is within the 700kg capacity. Check that the pumping handle is correctly inserted and that the release valve is fully closed. Verify the jack is positioned correctly on a stable surface and under the designated jacking point.

Check for any obstructions or debris around the lifting mechanism. Ensure the release valve is completely closed when attempting to lift. If the issue persists, there may be a hydraulic leak, and the jack may require professional inspection or servicing.

Ensure the handle is aligned correctly with the mechanism. Clean any dirt or debris from the handle socket and the jack mechanism. If the handle is bent, it may need to be replaced.

Confirm the vehicle is on a perfectly level and solid surface. Ensure the jack is positioned squarely under the jacking point and that no part of the jack is resting on uneven ground or body panels.