Best current price£58.31from eBay
Shopping.co.uk recommended and popular offers
eBay£58.31Visit shop SCANGRIP I-VIEW Rechargeable Headlamp with Sensor 400 lumens
Visit shop
B&Q£69.51Visit shop B&Q - 03.6212 I-View Rechargeable Headlamp Torch Sensor 400 Lumens Scg036212
Visit shop7 offers from £58.31 - £75.01
View price history by clicking the chart icon.
The Scangrip I-VIEW headlamp is designed for professionals needing optimal, hands-free illumination of their entire work area. Its key benefit is the wide-angle light that ensures no shadows, with a unique sensor mode for glove operation. A potential caveat is the built-in battery, which cannot be replaced by the user. This USB-C rechargeable LED headlamp offers adjustable brightness up to 400 lumens and is built to withstand demanding environments.
| Colour | Grey |
|---|---|
| Model Part Number | 03.6212 |
| Brand | Scangrip |
Battery life varies depending on the brightness setting. At 40 lumens, it can last up to 30 hours. At 400 lumens, it lasts approximately 3 hours. The built-in Li-ion battery is 1400 mAh.
The headlamp has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets. It is not designed for submersion.
You can charge the headlamp using the included USB-C cable connected to a standard USB power source. A full charge takes approximately 4.5 hours.
The beam angle is 120 x 60 degrees, providing a wide and expansive spread of light.
The battery is built-in and not designed for user replacement. For battery-related issues, please contact customer support.
The headlamp has a color temperature of 5700 K and a CRI (Color Rendering Index) of Ra > 80, providing neutral white light with good color accuracy.
IK07 is an impact protection rating, indicating the headlamp can withstand impacts of up to 2 Joules, equivalent to dropping it from a height of approximately 2 meters onto a hard surface.
Ensure the headlamp is charged. Connect it to a USB-C power source and check if the charging indicator lights up. Try a different USB-C cable or power adapter.
Make sure the sensor is not obstructed and that there is sufficient distance between your hand and the sensor. Ensure the headlamp is not in a mode where the sensor is deactivated.
The battery may be low; charge the headlamp fully. If the issue persists after charging, the LED or internal components may require service.
Some warmth is normal, especially at higher brightness settings. If it becomes uncomfortably hot, turn it off and allow it to cool. Ensure ventilation openings (if any) are not blocked. Contact support if overheating is severe.
Setup:
Compatibility:
Care:
