All Balls Caliper Rebuild Kit - Front - Yamaha Tenere XTZ700 2021-2024

No, this caliper rebuild kit contains seals, boots, bolts, snap rings, and washers. It does not include brake pads.

No, this specific kit is designed only for the front brake caliper of the Yamaha Tenere XTZ700.

The frequency depends on riding conditions and usage. It's recommended to inspect brake components regularly and rebuild or replace seals when performance degrades or leaks are detected, typically following manufacturer service intervals.

You will generally need standard metric wrenches and sockets, caliper piston tools, a brake bleed kit, and appropriate brake cleaner and lubricant. Refer to your motorcycle's service manual for a complete list.

Use a silicone-based brake lubricant specifically designed for brake system seals. Do not use petroleum-based products, as they can degrade rubber components.

This kit is precisely engineered for the Yamaha Tenere XTZ700 model years 2021-2024 front caliper only. Compatibility with other models is not guaranteed.

Ensure the brake system was thoroughly bled to remove all air. Check for any leaks around the caliper seals or banjo bolts.

Verify that the new seals and boots were installed correctly and lubricated. Ensure the piston bore is perfectly clean and free of debris. The piston itself may be damaged or corroded and might require replacement.

Lubricate the seals and the caliper bore with a silicone-based brake lubricant. Do not force seals into place; ensure they are seated correctly.

Double-check the installation of the caliper seals and the banjo bolt washers. Ensure all fittings are tightened to the correct torque specifications.