Luminosa Lighting Brass Mains Downlight, 230V 60W - Yellow
Best current price£13.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop B&Q - Luminosa Brass Mains Downlight230V 60W
Visit shopB&Q£13.99Visit shop All Offers
2 offers from £13.99 - £15.95
View price history by clicking the chart icon.
DebenhamsNetlighting Unisex Yellow Brass Mains Downlight 230V 60W In
Free delivery in 1–3 days
£15.95
Visit shop
Product Information
Full details
This Luminosa Lighting Brass Mains Downlight is ideal for homeowners and electricians seeking a reliable, mains-powered lighting solution with a classic brass finish. Its key benefit is its straightforward installation and compatibility with standard E27 bulbs, offering dimmable lighting capabilities. A minor caveat is that the R63 lamp is not supplied with the fitting, requiring a separate purchase. This downlight features a pressed steel construction with a brass finish, IP20 rating, and requires a 150mm ceiling void.
All features
| Colour | Yellow |
|---|---|
| Brand | Luminosa Lighting |
Extended Product Information
FAQs
What type of bulb does this downlight use?
It uses an E27 (ES) screw cap bulb, with an R63 shape recommended. The maximum wattage is 60W.
Is the bulb included with the downlight?
No, the R63 lamp is not supplied with the fitting and must be purchased separately.
Can I use any E27 bulb?
You can use any E27 bulb up to 60W. For dimming, you must use a dimmable bulb and a compatible dimmer switch.
What is the IP rating and where can it be used?
The IP rating is IP20, which means it is protected against solid objects larger than 12.5mm but offers no protection against water. It is suitable for general indoor use in dry areas.
Do I need a transformer for this downlight?
No, this is a mains voltage (230V) downlight, so no transformer is required.
What size hole do I need to cut for installation?
The recommended cut-out diameter is 8cm. A minimum ceiling void of 150mm is also required.
Troubleshooting
Downlight not illuminating
Check that the power is switched on at the mains. Ensure the E27 bulb is correctly screwed in and is not faulty. Verify all wiring connections are secure.
Dimming function not working
Confirm that a dimmable bulb is installed. Ensure the light switch is a compatible dimmer switch. Check the wiring for the dimmer circuit.
Fitting feels loose in ceiling
Re-check the spring clip fixings to ensure they are fully engaged with the ceiling material. Verify the ceiling thickness is within the 18mm limit.
Pros and Cons
Pros
- Easy installation due to mains power and included fixings.
- Versatile E27 lampholder supports a wide variety of bulb types.
- Dimmable feature allows for customizable ambiance.
- Durable pressed steel construction with an attractive brass finish.
- No external transformer required, simplifying the setup.
Cons
- The R63 lamp is not included and must be purchased separately.
- IP20 rating limits use to dry indoor environments only.
- Maximum wattage of 60W may be insufficient for very large or specific lighting needs.
- Requires a specific cut-out diameter and ceiling void for installation.
Setup, Compatibility & Care
Setup:
- Ensure the power supply is turned OFF at the mains.
- Cut a hole in the ceiling with the recommended 8cm diameter.
- Make sure there is a 150mm ceiling void available.
- Connect the 2-core silicon flex cable to the appropriate mains supply.
- Use the spring clip fixings to secure the downlight into the ceiling, ensuring the ceiling thickness does not exceed 18mm.
- Insert an R63 E27 lamp (max 60W, not supplied) into the lampholder.
- Restore power at the mains.
Compatibility:
- Bulb Type: E27 (ES) screw cap.
- Lamp Shape: R63 recommended.
- Maximum Wattage: 60W.
- Dimmability: Requires a dimmable bulb and compatible dimmer switch for dimming function.
- Ceiling Thickness: Up to 18mm.
- Ceiling Void: Minimum 150mm required.
Care:
- Always ensure the power is disconnected before cleaning.
- Wipe the fitting with a dry or slightly damp soft cloth. Avoid abrasive cleaners or solvents.
- Do not touch the lamp or lampholder when the fitting is in use or has recently been turned off, as they may be hot.