Primaplumb 32mm 45 Deg Spigot Bends - White
Best current price£3.99from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£3.99Visit shop Primaplumb 32Mm 45 Deg Spigot Bends White - Primpwspb4532wb - Grey
Visit shopThe Range£3.99Visit shop All Offers
3 offers from £3.99 - £4.55
View price history by clicking the chart icon.
The RangePrimaplumb 32Mm 45 Deg Spigot Bends White - Primpwspb4532wb - Grey
Free delivery in 1–3 days
£3.99
Visit shop
eBayPrimaplumb 32mm 45 Deg Spigot Bends White - PRIMPWSPB4532WB
Free delivery in 1–3 days
£4.43
Visit shop
Product Information
Full details
The Primaplumb 32mm 45 Deg Spigot Bends are high-quality plumbing components designed for both DIY enthusiasts and professional contractors looking to create efficient 45-degree angle transitions in 32mm piping systems. These white spigot bends offer a reliable and secure connection for improved water flow, though users should ensure they are using compatible solvent weld or push-fit adhesives depending on their specific pipe configuration to maintain a leak-free seal.
All features
| Model Part Number | Primpwspb4532Wb |
|---|---|
| Brand | Primaplumb |
Extended Product Information
FAQs
Are these fittings compatible with push-fit systems?
These are primarily designed for solvent weld systems, though some push-fit configurations may accept them if the dimensions are exact.
Can these be used for hot water drainage?
They are designed for standard wastewater temperatures, but they are not intended for high-heat or pressurized steam applications.
What tools do I need for installation?
You will typically need a pipe cutter or fine-tooth hacksaw, a file for deburring, and the appropriate solvent weld adhesive.
Is the finish paintable?
While the white finish is clean and professional, it can be lightly sanded and painted with plastic-compatible spray paint if necessary.
Can I use these for outdoor plumbing?
They are intended for indoor plumbing; outdoor use may lead to premature degradation due to UV exposure.
Troubleshooting
Joint is leaking after installation
Ensure the pipe was fully seated and that sufficient adhesive was applied to create an airtight seal.
Fitting does not slide onto the pipe
Check that the pipe diameter is exactly 32mm and ensure the end of the pipe is deburred and free of plastic burrs or debris.
Pros and Cons
Pros
- Durable and long-lasting material
- Standardized 32mm size fits most common pipe configurations
- Simplifies routing of piping around corners or obstructions
- Suitable for both professional and home-use applications
Cons
- Requires proper adhesive or sealant for a permanent bond
- Not intended for high-pressure industrial applications
- Limited to a fixed 45-degree angle
Setup, Compatibility & Care
To install these bends, ensure your 32mm pipe is cut cleanly and the ends are deburred to prevent uneven sealing. If using a solvent weld system, apply the appropriate cement to both the spigot and the interior of the mating pipe or fitting, then push firmly into position, holding for several seconds to allow the bond to set. For maintenance, avoid using harsh chemical drain cleaners, as they may degrade the plastic over extended periods. Regularly check the joint area for any signs of dampness or leakage, particularly after significant changes in water temperature.