Best current price£12.18from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£12.18Visit shop Us Pro Underbody Coating Gun Shutz Waxoy Stonechip Underseal Car Van 5060478386483
Visit shop
B&Q£12.79Visit shop B&Q - Underbody Coating Gun Shutz Waxoy Stonechip Underseal Car Van 8775
Visit shop5 offers from £12.18 - £13.95
View price history by clicking the chart icon.
The US PRO Underbody Coating Gun (MPN: 8775) is designed for automotive professionals and DIY enthusiasts seeking efficient application of underbody sealants and cavity coatings. Its key benefit is the flexible tube for reaching difficult areas, simplifying a traditionally messy job. A potential caveat is the need for a compatible air compressor to operate effectively. This gun facilitates precise application of protective coatings to vehicle undercarriages and within structural cavities.
| Model Part Number | 8775 |
|---|---|
| Brand | US PRO |
This gun is designed for viscous underbody sealants, cavity waxes, and similar automotive protective coatings. It is not suitable for thin spray paints or solvent-based materials.
The recommended working pressure for this gun is 3.5 bar (50 psi).
The flexible PE tube is 600mm (approximately 23.6 inches) long.
No, a standard workshop air compressor capable of providing a regulated 3.5 bar (50 psi) is sufficient. Ensure it can maintain this pressure during use.
After each use, flush the feed pipe and flexible tube with a recommended solvent to prevent blockages. Wipe the exterior with a damp cloth. Refer to the sealant manufacturer's instructions for specific cleaning recommendations.
Yes, the 600mm flexible tube is specifically designed to reach and coat internal cavities effectively, making it ideal for rustproofing.
The gun includes air fittings compatible with both UK and EU standard air lines.
Check that the air supply is connected and at the correct pressure. Ensure the flexible tube and feed pipe are fully submerged in the sealant and not blocked. Verify the trigger is being fully depressed.
The sealant may be too thick or contain debris. Ensure the sealant is properly agitated and the feed line is clear. Check for air leaks around fittings. Clean the nozzle if clogged.
Inspect all air fittings for a secure connection. Check seals and O-rings within the gun for damage and replace if necessary. Ensure the air inlet is properly tightened.
Warm the sealant slightly (if product allows) or ensure the tube opening is clear. Some sealants may require a firmer push.
Setup:
Compatibility:
Care:
