Xcel Home WRAS Approved PushFit Flexible Connector with Isolation Valve - 15mm x 3/4" BSP - 500mm Long
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Xcel Home WRAS Approved PushFit Flexible Connector is designed for UK plumbers and DIY enthusiasts needing a reliable and easy-to-install fluid control solution. Its key benefit is the WRAS approval ensuring compliance with stringent water regulations and quick, watertight connections via push-fit technology. A potential caveat is its specific connection sizes (15mm push-fit and 3/4" BSP), requiring compatibility with existing pipework. This connector features a secure latching mechanism for leak-free seals, an integrated isolation valve for manual flow control, and reusable fittings for convenience. It is available in multiple lengths to suit various installation needs.
All features
| Brand | Xcel Home |
|---|
Extended Product Information
FAQs
What does WRAS Approved mean?
WRAS Approval signifies that the product has been rigorously tested and meets the high standards set by UK water regulations. This means it is approved for use in systems carrying drinking water and is accepted by all water suppliers in the UK.
Can I use this connector with different sizes of pipe?
This specific connector is designed for 15mm push-fit connections on one end and a 3/4" BSP threaded connection on the other. It is not suitable for other pipe sizes.
How do I install the connector?
Installation is simple: push the 15mm pipe into the push-fit end until it locks. Connect the 3/4" BSP end to the appropriate fixture. No tools are required for the push-fit connection.
Are the fittings reusable?
Yes, the push-fit fittings are designed to be reusable. You can demount the pipe by pushing the outer ring inwards and pulling the pipe out.
What is the purpose of the isolation valve?
The isolation valve allows you to manually control the flow of water through the connector. It's useful for shutting off water to a specific fixture or section of pipework for maintenance or in case of an emergency, without affecting the main water supply.
What lengths are available?
This model is available in three lengths: 300mm, 500mm, and 900mm.
What kind of pipe can I use with the push-fit end?
You can use standard 15mm copper or plastic pipes that meet relevant plumbing standards. Ensure the pipe end is clean and undamaged for a secure connection.
Troubleshooting
Connector does not seal / leaks
Ensure the pipe is pushed in fully to the stop. Check that the pipe end is clean, squarely cut, and free from damage or deformation. Verify the pipe is the correct 15mm size for the push-fit connector.
Pipe cannot be inserted into the connector
Check for obstructions inside the connector. Ensure the pipe is not deformed. Lightly lubricate the pipe end with water (not oil-based lubricants) if necessary.
Isolation valve is stiff or difficult to turn
Operate the valve back and forth a few times to loosen it. Ensure there are no external obstructions. If the issue persists, consider replacing the valve.
Connector cannot be disconnected
Ensure the release ring is pushed in fully towards the connector body before attempting to pull the pipe out. Check that the pipe is not stuck due to debris or damage.
Pros and Cons
Pros
- Meets stringent UK water regulations (WRAS Approved).
- Quick and easy installation with push-fit technology.
- Secure and watertight connections.
- Isolation valve provides convenient flow control.
- Fittings are reusable, offering long-term value.
- Suitable for various plumbing applications due to standard BSP thread.
Cons
- Specific connection sizes (15mm push-fit, 3/4" BSP) may limit compatibility with non-standard pipework.
- Primarily designed for UK water systems.
- Weight (0.3747858454 pounds) might be a minor consideration for very large installations.
- Requires sufficient pipe insertion depth for a secure seal.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the pipe end is clean, free from burrs, and cut squarely. For copper or plastic pipes, ensure the pipe is not damaged or deformed.
- Push the pipe firmly into the 15mm push-fit connector until it reaches the internal stop. You should feel or hear a 'click' as it secures.
- Connect the 3/4" BSP end to the relevant threaded fixture.
- To disconnect, push the outer ring of the push-fit connector inwards while simultaneously pulling the pipe out.
Compatibility:
- Compatible with 15mm copper or plastic pipework that meets relevant standards.
- Compatible with 3/4" BSP threaded fittings.
- WRAS Approval confirms suitability for potable (drinking) water systems in the UK.
Care:
- These fittings require no ongoing maintenance. Periodically check for leaks around connections.
- Avoid exposing the fitting to excessive external forces or impacts.
- If the isolation valve needs to be operated, do so smoothly to prevent water hammer.