Kenable CAT7 600Mhz 10 Gigabit F/FTP Shielded RJ45 Network Ethernet Cable - 0.5m - Black

This Kenable CAT7 cable supports speeds of up to 10,000 Mbit/s (10 Gigabit Ethernet).

Yes, this CAT7 cable is backward compatible and will work with Cat6a, Cat6, Cat5e, and Cat5 ports, though speeds will be limited by the slowest component in the network connection.

It means the cable has overall foil shielding (F/STP) and each individual twisted pair within the cable is also wrapped in foil shielding. This provides enhanced protection against crosstalk and electromagnetic interference.

Yes, the cable is made from full copper strands and is suitable for use with PoE devices.

You can connect any device with an RJ45 Ethernet port, including PCs, laptops, gaming consoles, 4K TVs, CCTV systems, access points, and routers.

To achieve the maximum 10 Gigabit speeds, both the sending and receiving network devices (e.g., your router, switch, and computer's network card) must also support Cat7 or at least Cat6a standards.

This cable has a frequency rating of 600Mhz.

Ensure the cable is securely plugged into both the source and destination devices. Verify that the network devices themselves are powered on and configured correctly. Test with a different known-working cable if possible.

Confirm that the connected devices support Cat7 or Cat6a speeds. Check if other network devices are consuming significant bandwidth. Ensure the cable is not damaged and is properly seated in the ports.

Inspect the cable for any visible damage. Ensure the cable is not routed near sources of strong electromagnetic interference. Try a different port on your networking equipment.

This is normal for double-shielded cables. Avoid forcing sharp bends, which can damage the internal structure. Route the cable gently around obstacles.