Bon Tool Tuck Pointer Wood Handle - 5/16" (11-252)

A tuck pointer is a specialized trowel used for applying mortar into narrow joints, typically in brickwork, masonry, and stonework. It's ideal for repairs, repointing, and filling small gaps.

The 5/16" width is specifically suited for standard-sized mortar joints found in many brick applications. It allows for precise application without overfilling wider gaps.

While it can carry mortar, this tool is primarily designed for detailed work in joints, not for spreading mortar over large flat surfaces. Wider trowels are more suitable for that purpose.

It is best to clean the tool immediately after each use to prevent mortar from hardening on the blade, which can affect performance and longevity.

Periodically inspect the wood handle for roughness. Light sanding and application of a wood sealant or oil can maintain its condition and prevent splintering.

The blade is fully ground and polished for its intended use. It does not require sharpening but should be kept clean and free from rust or damage.

Bon Tool offers this tuck pointer in various widths, including 1/4", 1/2", 5/8", 3/4", 7/8", and 1" variants, often with different handle materials as well.

Ensure the blade is clean and dry before picking up mortar. A slight dampening of the blade can sometimes help with initial adhesion.

Verify the blade is clean and free of dried mortar. If the blade is new, it may require a short break-in period. Ensure no damage has occurred to the taper.

Lightly sand the handle with fine-grit sandpaper and apply a wood sealant or oil (like linseed oil) to protect and smooth the surface. Ensure it's fully dry before next use.

Check for consistency in mortar mix. Ensure the blade is being held at a consistent angle and pressure against the joint.