Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop Velocity Premium Multi-Use Screws - Double Countersunk - Yellow 600pcs
Visit shop
B&Q£27.97Visit shop B&Q - TimcoVelocity Premium Multi-Use ScrewsGrab PackPzDouble CountersunkYellow (Size 600Pcs600 Pieces)
Visit shop7 offers from £22.99 - £35.00
View price history by clicking the chart icon.
The Timco Velocity Premium Multi-Use Screws are designed for DIY enthusiasts and professionals seeking rapid installation and exceptional pull-out resistance across various materials. Their patented dual-angle thread and quick-start slash point tip ensure a consistent, reliable performance, minimizing material splitting and timber jacking. A potential caveat is the specific driver bit size required (PZ2), so ensure you have the correct tool before starting your project.
| Colour | Yellow |
|---|---|
| Model Part Number | PTDTIMVYGPACK |
| Brand | TIMco |
The partially threaded design (on screws 40mm and above) means the threads do not extend all the way to the head. This prevents the upper piece of timber from being 'jacked' or lifted upwards as the screw is tightened, resulting in a flatter, more secure joint.
The Slash Point Tip (on screws 25mm and above) is designed to reduce the torque needed to start the screw and helps to prevent the timber from splitting, especially when working near the edge of a piece of wood.
The Zinc & Yellow finish offers good corrosion resistance, making them suitable for many outdoor applications. However, for prolonged exposure to harsh weather conditions, stainless steel screws are generally recommended.
You will need a PZ2 driver bit for these Timco Velocity screws.
These screws are primarily designed for wood and wood-based materials. While they might penetrate thin sheet metal in some applications, they are not specifically designed for metal fastening and may not provide adequate strength or hold.
This specific pack contains 600 screws.
Ensure you are using a PZ2 driver bit that is in good condition and properly seated in the screw head. Reduce driving speed and pressure if using an impact driver.
Verify you are using screws of appropriate length. If screwing very close to the edge or in very hard timber, drill a pilot hole first. Ensure the slash point tip (on screws 25mm+) is engaging correctly.
Check if the screw is long enough for the material. Ensure you are not over-driving the screw. The dual-angle thread design provides superior hold, so ensure it is properly engaged in the base material.
Confirm you are using adequate power from your drill/driver. Check that the material is suitable for this type of screw. The rapid drive twist cut should ensure smooth driving; if not, check for obstructions or potential damage to the screw tip.
Setup:
Compatibility:
Care:
