National Skirting Skirting Board - White - Groove II

After installation and ensuring the primer is dry, apply your chosen paint or gloss in thin, even coats. Allow each coat to dry thoroughly. A second coat is often recommended for a durable finish. Light sanding between coats can improve smoothness.

While MDF is durable, it is susceptible to moisture. It is recommended to use this skirting board in drier areas of the home. If used in moisture-prone areas, ensure it is thoroughly sealed with multiple coats of a high-quality, moisture-resistant paint or gloss.

For the most professional look, use a mitre saw to cut a 45-degree angle on each piece, allowing them to join seamlessly. Apply wood adhesive to the cut edges before fitting them together.

The dimensions are 18mm thickness, 220mm height, and 3040mm length.

The white finish is a primer. It is designed to be painted over with your desired colour and finish.

The Groove II features a distinctive soft, curved edge detail running down its face, providing a classic and slightly decorative element suitable for traditional interiors. Simpler profiles might be flat or have sharper, more modern edges.

Use a sharp, fine-toothed saw blade designed for cutting MDF. Ensure the board is securely supported during cutting.

Ensure surfaces are clean, dry, and free of dust. Use an appropriate, strong adhesive recommended for MDF and skirting boards. Consider supplemental pinning or screwing for extra security.

Ensure the primer is completely dry before painting. Apply paint in thin, even coats, allowing adequate drying time between each coat. A light sanding with fine-grit sandpaper between coats can also help.

This typically occurs due to excess moisture. Ensure the room has adequate ventilation and that the skirting board is properly sealed with paint or gloss, especially near potentially damp areas.