Best current price£62.99from alanwadkinstoolstore.co.uk
Shopping.co.uk recommended and popular offers
alanwadkinstoolstore.co.uk£62.99Visit shop Festool 497871 14mm Domino Router Cutter For DF700
Visit shop7 offers from £62.99 - £125.32
View price history by clicking the chart icon.
The Festool 14mm Domino Cutter is an essential precision-engineered accessory designed specifically for woodworkers and cabinet makers using the Festool DF 700 Domino joining machine. Its primary benefit is delivering perfect, clean 14mm mortise joints with a 70mm routing depth, ensuring superior structural integrity for large-scale joinery projects. However, users should note that this cutter is purpose-built exclusively for the DF 700 and is not compatible with the smaller DF 500 model.
| Model Part Number | 497871 |
|---|---|
| Brand | Festool |
No, this 14mm bit is specifically engineered for the DF 700 Domino joiner and is physically incompatible with the DF 500.
You will notice increased resistance during the cut, more vibration, or burning marks on the interior walls of the mortise.
This cutter allows for a maximum routing depth of 70mm.
No, this is a single piece (1 pc) package.
It is not recommended to sharpen this bit manually, as it requires specialized equipment to maintain the precise geometry needed for the Domino system.
The bit may be dull after long use or clogged with resin; clean with a resin remover or replace the bit.
Ensure the spindle is clear of wood dust and debris; check that the threads on both the bit and spindle are not cross-threaded.
To install the 14mm cutter, ensure your DF 700 machine is unplugged or the battery is removed. The bit features an internal thread that secures directly onto the machine's spindle. Always verify that the bit is fully seated and tightened before powering on the tool. For maintenance, clean the bit periodically with a resin solvent to remove sap and wood buildup, which can impair cutting efficiency. When not in use, store the cutter in its protective packaging to prevent damage to the carbide tips. Never attempt to sharpen the carbide edges manually, as this will destroy the precision geometry required for the Domino system.
