Tecnosel Graphics Kit - Honda CR125 1991 1992 - Red White

This graphics kit is designed specifically for the Honda CR125 models from the years 1991 and 1992.

No, the different pieces of the kit cannot be sold separately. You must purchase the complete graphics kit.

The decals are made from transparent, very resistant material printed on the back, designed to withstand wear and tear from typical off-road use.

The tank stickers have holes to allow gasoline vapors to escape. However, on tanks that are already significantly worn, some slight detachment may still occur. Proper surface preparation is key.

Clean the decals using a soft, damp cloth. Avoid abrasive cleaners or high-pressure washing directly on the decals.

Yes, the kit is designed for DIY application. It is recommended to clean surfaces thoroughly and apply in a warm environment, using a squeegee to help smooth out the decals and remove air bubbles.

The kit includes decals for the tank pair, radiator shrouds pair, airbox pair, number plates, fork protections pair, swing arm pair, front fender, and rear fender.

Ensure the surface is perfectly clean, dry, and free of any grease or residue. Re-clean the area. For best results, apply in a warm environment and use a squeegee to press out air bubbles. If the tank surface is significantly worn, consider using a plastic adhesion promoter suitable for vinyl graphics.

While applying, use a squeegee or credit card to push bubbles towards the edge. If bubbles appear after application, you can try to carefully lift the edge of the decal and reapply, or for very small bubbles, a tiny pin prick to release the air might work, though this is not recommended for optimal appearance.

This can happen on heavily contoured or worn surfaces. Ensure the initial application was firm. If peeling is minor, a small amount of clear epoxy or vinyl adhesive applied carefully to the edge may help, but use sparingly. For tank decals, ensure the surface beneath is not overly porous or damaged.