Best current price£14.98from eBay
Shopping.co.uk recommended and popular offers
eBay£14.98Visit shop U-Pol BLEND/AL #9 Transparent Fade Out Blending Solvent 450ml Aerosol Clear Upol
Visit shop10 offers from £14.98 - £187.92
View price history by clicking the chart icon.
This guide is for anyone using U-POL BLEND/AL #9, a transparent fade-out blending solvent, to achieve seamless repairs on vehicles. The key benefit is its ability to blend clearcoats and solid colors, creating invisible transitions. However, proper application technique is crucial for optimal results.
| Model Part Number | BLEND/AL |
|---|---|
| Brand | U-POL |
Clean and sand the surface according to the paint manufacturer’s instructions. Ensure the surface is free of contaminants.
Use a respirator, gloves, and eye protection to avoid inhaling the product and contact with skin and eyes.
Hold the can approximately 6-8 inches (15-20 cm) from the surface during application.
Apply thin, even coats until the blend is seamless. Multiple thin coats are better than one thick coat.
Drying time depends on environmental conditions. Allow sufficient time for each coat to dry before applying the next coat. Consult the product label for specific recommendations.
U-POL BLEND/AL #9 is compatible with most automotive clearcoats and solid colors, but it's always best to test on a small, inconspicuous area first.
Store in a cool, dry place away from direct sunlight and heat.
Apply additional, thin coats of BLEND/AL #9, ensuring proper overlap. Allow sufficient drying time between coats.
Ensure proper surface preparation. Apply thin, even coats and avoid spraying from too far away or too close. Check for contamination on the surface.
Ensure the nozzle is clear of any blockage. If the can is old, it might be the product has expired. Replace the aerosol can.
Setup:
Compatibility:
Care:
