B&Q Green Treated Sawn Carcassing Timber - 1.8m x 22mm x 150mm - 5 Pack

Green pressure-treated sawn softwood carcassing timber designed for outdoor use. This pack of five...

Best current price£59.40from B&Q

All Offers

2 offers from £59.40 - £78.00

View price history by clicking the chart icon.

B&Q - 22mm X 150mm Green Treated Sawn Carcassing Timber (6" X 1") 1800mm (X5 Lengths)
Free delivery in 1–3 days
£59.40
Visit shop
HomebaseGreen Treated Sawn Carcassing Timber 1.8m x 22mm x 150mm 5 Pack
Free delivery in 1–3 days
£78.00
Visit shop

Product Information

Full details

Designed for DIY enthusiasts and landscapers, this B&Q Green Treated Sawn Carcassing Timber is an essential structural element for outdoor construction projects, specifically optimized for use as a gravel board. The key benefit of this product is its pressure-treated durability, which effectively resists rot and moisture damage when placed against the ground, though users should note that the softwood material requires periodic re-treatment if cut to ensure long-term integrity.

All features

BrandB&Q

Extended Product Information

FAQs

Can I use these boards for raised garden beds?

Yes, they are suitable for raised beds, but ensure you line the inside with a waterproof membrane to further protect the timber from continuous damp soil contact.

Is the green color permanent?

The green tint is caused by the preservative treatment. It will fade to a silver-grey over time when exposed to UV light, which is normal and does not affect the rot resistance.

Do I need special fixings for this timber?

We recommend using galvanised or stainless steel nails and screws to prevent the metal from corroding due to the chemicals used in the pressure treatment process.

Are these boards suitable for decking?

These are designed as carcassing timber or gravel boards, not as decking boards. They lack the smooth finish and structural profile required for foot traffic.

How should I store the boards before use?

Store them in a flat, dry, and well-ventilated area, preferably raised off the ground to prevent moisture accumulation before installation.

Troubleshooting

Timber showing signs of moisture absorption at the ends

Immediately sand the area and apply a generous coat of high-quality exterior wood preservative.

Board warping or twisting after installation

Ensure the board is securely fixed at both ends to the fence posts using at least two screws per connection point to maintain tension.

Difficulty driving screws into the timber

Pre-drill pilot holes with a slightly smaller diameter than the screw shank to prevent splitting the softwood.

Pros and Cons

Pros

  • Resistant to rot and moisture due to pressure treatment
  • Perfect height for standard gravel board applications
  • Cost-effective multipack for small to medium fencing jobs
  • Easy to work with using standard hand or power tools

Cons

  • Raw cut ends must be retreated to maintain warranty/protection
  • Natural wood may shrink or warp slightly over time
  • Not suitable for load-bearing primary structural applications
  • Surface may have occasional knots inherent to softwood

Setup, Compatibility & Care

To install, ensure your fence posts are set at appropriate intervals and use galvanised screws or nails to prevent rust. When cutting the timber to length, it is critical to apply a wood preservative to the freshly cut ends; this seals the wood where the factory-applied pressure treatment has been compromised. For ongoing care, consider applying an exterior-grade wood stain or weather-resistant treatment annually to prevent surface cracking and maintain the wood's appearance.

Price History

DatePrice
Visit shop