Shopping.co.uk

Oil Filter - Mann H813/1X

Oil Filter - Mann H813/1X

This Mann Oil Filter (H813/1X) is a high-quality replacement part designed for various Austin mode...

Best current price£8.95from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

11 offers from £8.95 - £15.56

View price history by clicking the chart icon.

eBayMANN-FILTER H 813/1 x Oil Filter for AUSTIN,MG,MORRIS
£5.90 delivery
£8.95
Visit shop
Blueperry agriculture (UK)Mann-Filter Oil Filter Element H8131x
Free delivery in 1–3 days
£15.30
Visit shop

Product Information

Full details

This guide provides essential information for users of the Mann H813/1X Oil Filter. Designed for various Austin, MG, and Morris models, this filter ensures optimal engine performance by removing contaminants. Note that proper fitment is crucial, so always verify compatibility with your vehicle before installation.

All features

Model Part NumberH813/1X
BrandMann

Extended Product Information

FAQs

How often should I change the Mann H813/1X oil filter?

Follow the oil change interval recommended by your vehicle manufacturer, typically every 3,000 to 5,000 miles or as specified in your owner's manual.

Can I use this filter with any type of oil?

No, always use the oil type and viscosity recommended for your vehicle model.

What happens if I install the filter incorrectly?

Incorrect installation can lead to oil leaks, reduced oil pressure, and potential engine damage.

Where can I find the correct oil filter for my car?

Use the make and model tool to confirm fitment or contact the seller for assistance.

What are the dimensions of the filter?

The filter has a height of 88 mm, an outer diameter of 72 mm, and an inner diameter of 32 mm.

Does this filter come with a gasket?

Yes, it includes a gasket/seal for proper installation.

What brands are cross-referenced with this filter?

It is cross-referenced with brands such as ACDelco, ALCO FILTER, ARMAFILTER, BALDWIN, BOSCH, and others.

Troubleshooting

Oil leaks after installation.

Check the filter and drain plug for proper tightening. Ensure the gasket/seal is correctly seated.

Engine knocking or unusual noises after filter change.

Check the oil level and oil pressure. The filter may be restricting oil flow if it's damaged.

Difficulty removing the old filter.

Use an oil filter wrench designed for your filter size. Apply penetrating oil if needed.

Pros and Cons

Pros

  • Wide compatibility with various Austin, MG, and Morris models.
  • Efficient filtration provided by a filter insert design.
  • Comes with a gasket/seal for ease of installation.
  • Cross-referenced with multiple brands, providing flexibility in sourcing replacements.

Cons

  • Requires verification of fitment for specific vehicle models.
  • Installation requires some mechanical knowledge.
  • Filter insert type may require more frequent replacement compared to spin-on filters.
  • Availability may vary depending on the retailer and location.

Setup, Compatibility & Care

Setup:

  1. Ensure your vehicle is compatible with the Mann H813/1X. Check the make and model tool for fitment.
  2. Gather the necessary tools, including an oil filter wrench, drain pan, and the new oil filter.
  3. Warm up the engine, then turn it off and allow it to cool slightly.
  4. Locate the oil filter and drain plug.
  5. Place the drain pan under the drain plug and remove the plug to drain the old oil.
  6. Once the oil has drained, remove the old oil filter using the oil filter wrench.
  7. Lubricate the gasket/seal on the new filter with fresh oil.
  8. Screw the new filter on by hand until the gasket makes contact, then tighten it according to the filter's instructions (usually about 1/2 to 1 turn).
  9. Replace the drain plug and tighten it.
  10. Add new oil to the engine (check your owner's manual for the correct type and quantity).
  11. Start the engine and check for leaks around the filter and drain plug.
  12. Dispose of the old oil and filter responsibly.

Compatibility:

  • Austin 1300 Mk2 1.3 (1970-1974)
  • Austin 1000-Series Allegro
  • Mini
  • MG
  • Morris

Care:

  • Replace the oil filter at the intervals recommended by your vehicle manufacturer, typically every 3,000 to 5,000 miles, or as specified in your owner's manual.
  • Always use the correct oil type and viscosity recommended for your vehicle.
  • Check the oil level regularly and top up as needed.

Price History

DatePrice
Visit shop