Trek Slash+ 9.7 Electric Mountain Bike - Black

The Trek Slash+ 9.7 is designed for aggressive trail riding, enduro, and demanding downhill and all-mountain use. Its mid-assist motor, robust suspension, and durable carbon frame make it ideal for challenging terrain.

Battery life varies greatly depending on terrain, assist level, rider weight, and pedaling effort. On average, expect anywhere from 1 to 4 hours of ride time, with lower assist levels and flatter terrain offering longer durations.

Yes, the bike is designed to be ridden in various weather conditions. However, it's crucial to clean and dry the bike thoroughly after riding in wet or muddy conditions, especially focusing on the drivetrain and motor to prevent corrosion and ensure longevity.

Trek specifies a system weight limit (rider, bike, and any cargo) of 300 lbs (136 kg) for this model. Always consult the latest Trek specifications for the most up-to-date information.

The angle-adjust headset allows you to fine-tune the head tube angle for different riding conditions. Typically, this involves loosening specific bolts on the headset cups and rotating the adjustable crown race. Refer to the bike's manual or consult a qualified mechanic for detailed instructions.

The Slash+ 9.7 is designed around its specific wheel size and travel configuration. While some minor adjustments might be possible, using significantly different wheel sizes is not recommended and could negatively impact geometry, performance, and warranty.

The TQ HPR 60 motor is designed for low maintenance. Regular cleaning of the bike is important, and care should be taken not to direct high-pressure water jets at the motor housing. Any internal motor issues should be addressed by an authorized Trek dealer.

Ensure the battery is charged and properly seated. Check the TQ LED display for error codes. Verify that assist is enabled via the controller and that the speed sensor is clean and properly aligned.

Ensure the battery is fully charged before each ride. Check tire pressure, as underinflated tires increase rolling resistance. Riding in lower assist modes will conserve battery life. Extreme cold temperatures can temporarily reduce battery performance.

Re-check suspension sag settings and air pressure. Ensure the rebound damping is adjusted correctly for your weight and riding style. Inspect suspension seals for damage or leaks.

Inspect and clean the drivetrain, particularly the chain and cassette. Check for loose bolts on the cranks, pedals, handlebars, and suspension pivots. Ensure the seatpost and saddle clamp are properly greased and tightened.

Check brake pad wear and replace if necessary. Inspect rotors for contamination or damage. Ensure the brake fluid is not low and the system is not air-bound; bleeding may be required. Clean rotors with isopropyl alcohol.