Best current price£5.89from eBay
Shopping.co.uk recommended and popular offers
eBay£5.89Visit shop Revell 39601 Contacta Liquid Cement 13g
Visit shop
Debenhams£8.99Visit shop Revell Unisex Multicolor 9601 Contacta Liquid Cement (18G)
Visit shop12 offers from £5.89 - £12.95
View price history by clicking the chart icon.
This guide is for plastic model enthusiasts seeking a fast and strong bond. Revell Contacta Liquid offers an instant, weld-like adhesion by dissolving plastic surfaces, ensuring a firm connection. A potential caveat is its very thin consistency, which requires careful application to avoid excess flow.
| Model Part Number | 39601 |
|---|---|
| Brand | Revell |
It works by chemically dissolving the surface of the plastic parts where it is applied. When the parts are pressed together, the dissolved plastic fuses, creating a strong, welded bond as it dries.
It is generally not recommended for clear plastic as the solvent can cause clouding or frosting. For clear parts, consider using a specialized clear plastic cement or a polystyrene-safe clear glue.
While the bond sets very quickly, allowing it to fully cure for 24 hours is recommended before sanding, painting, or putting stress on the joint.
The brush is integrated into the cap and is not designed to be easily replaceable. Maintaining its cleanliness after each use is key to its longevity.
Revell Contacta Liquid is specifically formulated for polystyrene and similar plastics used in model kits. It may not adhere well to or could damage other materials like metal, wood, or certain types of plastic.
Yes, as it contains solvents, it has a noticeable odor. It is best used in a well-ventilated area.
The bottle contains 18g of fluid adhesive.
Apply the glue more sparingly. Ensure the model part is held at an angle that allows excess glue to run away from visible areas, or use a spare piece of plastic to wick away excess.
Ensure surfaces are clean and dry. Apply a slightly thicker coat of glue or hold the parts together for a longer duration. Check that you are using compatible plastic types.
Clean the brush immediately after use with a small amount of Revell Contacta Liquid or isopropyl alcohol. If hardened, try to soften it gently with the liquid glue or replace the brush if possible.
This is a characteristic of the welding process. Apply the glue more precisely and avoid over-application. If distortion is significant, it may indicate an incompatible plastic or excessive solvent exposure.
Setup: Revell Contacta Liquid is ready to use straight from the bottle. Ensure the model parts to be joined are clean, dry, and free from dust or grease for optimal adhesion. Shake the bottle gently before use if any separation is visible.
Application: Apply the liquid glue using the brush attached to the cap. For best results, apply the adhesive to the *inside* surfaces of the parts you intend to join. Then, carefully press the components together into their desired position. Hold them firmly for a few seconds until the bond begins to set.
Compatibility: This adhesive is designed primarily for use with polystyrene and similar plastics commonly found in plastic model kits. It may not be suitable for certain types of resin, metal, or pre-painted surfaces. Always test on an inconspicuous area or a scrap piece of plastic first if you are unsure.
Care: Store the bottle upright in a cool, dry place away from direct sunlight and heat. Ensure the cap is tightly sealed after each use to prevent the solvent from evaporating. Clean the brush with a small amount of the glue itself or a suitable solvent (like isopropyl alcohol) immediately after use if it becomes clogged.
