Best current price£47.59from eBay
Shopping.co.uk recommended and popular offers
eBay£47.59Visit shop 5 x Novol Spectral UNDER 395 Epoxy Primer 500ml Aerosol Colour: Light Grey
Visit shop2 offers from £47.59 - £51.82
View price history by clicking the chart icon.
The Novol Spectral UNDER 395 Epoxy Primer is designed for automotive technicians and industrial finishers who require a robust, high-performance base layer for metal surfaces. It offers exceptional adhesion and long-term corrosion resistance, providing a durable foundation that prevents paint failure; however, users should note that as an aerosol, it is best suited for small-to-medium repair areas rather than full-vehicle coverage.
| Colour | Grey |
|---|---|
| Model Part Number | N87270 |
| Brand | Novol |
Yes, once the primer is fully cured, it is recommended to lightly sand the surface with fine-grit sandpaper to ensure a perfectly smooth finish before applying the topcoat.
This product is primarily designed for metal substrates. Use on plastic may require a specific plastic adhesion promoter for optimal results.
Drying times vary based on temperature and humidity, but it typically becomes touch-dry in minutes and fully cured for over-coating within a few hours.
It is compatible with most standard automotive basecoats and topcoats, but a small test patch is always recommended.
Yes, provided the nozzle is cleared by spraying upside down, the remaining primer can be stored for future use.
Clean the nozzle tip with a solvent-based cleaner or replace with a spare aerosol nozzle.
Ensure you are holding the can at the correct distance and check that your ambient temperature is not too high, which can cause the primer to dry before hitting the surface.
Verify that all previous coatings and surface contaminants were removed and that the metal was properly degreased before priming.
Before use, ensure the surface is completely free of dust, grease, and silicone by cleaning with a dedicated degreaser. Shake the can vigorously for at least two minutes to ensure the pigments and epoxy components are fully mixed. Apply in a well-ventilated area, preferably between 15-25 degrees Celsius, keeping the nozzle 20-30cm from the surface. Use multiple thin layers rather than one heavy, wet coat to prevent runs. After application, turn the can upside down and spray for a few seconds to clear the nozzle. Store in a cool, dry place away from direct sunlight to maintain the integrity of the chemical mixture.
