Kenable Pulse Xlr Microphone Male To Female Cable - Black - 1.5M

A screened cable, like this PULSE model, significantly reduces or eliminates interference from electromagnetic sources such as power supplies, fluorescent lights, or other electronic equipment, resulting in a cleaner audio signal.

With a length of 1.5 meters, this cable is best suited for shorter connections. For longer runs (e.g., over 5 meters), signal degradation or increased susceptibility to noise can become a factor, and a longer, higher-quality cable might be necessary.

This cable features standard 3-pin XLR connectors and is designed for connecting microphones to audio interfaces, mixers, Preamps, or powered speakers. It can also be used for other line-level audio signals that utilize XLR connections.

Use a dry, lint-free cloth to gently wipe the connector pins and housing. Avoid using liquids or solvents, as these can damage the internal contacts.

The cable has a diameter of 6mm, indicating a relatively robust and durable construction.

While this cable is designed to carry audio signals, it is compatible with phantom power (+48V) supplied by mixers or interfaces to condenser microphones, as long as the connected equipment supports it.

Ensure both XLR connectors are fully seated. Check that the cable is not damaged. Test with a different microphone or input to isolate the issue.

Verify that the cable is properly screened and not damaged. Ensure all connected equipment is properly grounded. Try moving the cable away from power sources or other electronic devices.

Gently inspect the XLR connector for any visible damage. Ensure the locking mechanism on the connector is functioning correctly. If the connector is damaged, the cable may need replacement.