Best current price£6.30from eBay
Shopping.co.uk recommended and popular offers
eBay£6.30Visit shop 45 Degree Fitting For 100R6 Push On Hose – 1/2 BSP Thread, 1/2 in. Bore
Visit shop3 offers from £6.30 - £12.77
View price history by clicking the chart icon.
This 45-degree fitting is designed for automotive enthusiasts and DIY mechanics working with 100R6 socketless hose. It offers a cost-effective and tool-free solution for plumbing oil coolers, remote filter heads, or catch tanks, ensuring a leak-free connection with its integrated barbs. A potential consideration is that it's specifically for socketless hose types, requiring users to ensure hose compatibility.
| Model Part Number | 19282 |
|---|---|
| Brand | Automotive Plumbing Solutions |
This fitting is designed exclusively for 100R6 socketless hose. It will not work with braided hose or other types.
No, assembly is tool-free. The hose simply pushes onto the fitting, and the barbs secure it.
This fitting is best suited for low to moderate pressure applications like oil or vacuum lines. It is not recommended for high-pressure fuel systems.
The thread sizes available include various BSP and JIC standards. This specific model has a 1/2 BSP thread.
It indicates that the fitting has a 45-degree angle between the hose connection and the threaded end, aiding in hose routing.
Push the compatible socketless hose firmly onto the fitting until it is fully seated over the barbs. A secure connection is achieved when the hose cannot be easily pulled off.
Ensure the hose is pushed on completely to engage the barbs. Verify you are using the correct size and type of 100R6 socketless hose. Check for any debris on the hose end or inside the fitting.
Slightly warm the end of the hose in warm (not hot) water to make it more pliable. Ensure the hose end is cut cleanly and squarely. Do not force the hose; if it's excessively tight, you may have the wrong size hose or fitting.
Confirm that the thread type (BSP or JIC) and size match the component's port. Ensure the component's threads are clean and undamaged.
The swivel may require a small amount of appropriate lubricant. Ensure no debris is caught in the swivel mechanism. Avoid overtightening the screw threads, which can bind the swivel.
Setup: Ensure you are using the correct size of 100R6 socketless hose that matches the bore size of the fitting (1/2 inch in this case). Push the hose firmly onto the fitting until it reaches the internal barbs. You should feel or hear a slight 'click' or resistance as the hose fully seats. The swivel thread end can then be screwed into your component (e.g., oil filter housing, catch tank) and tightened to the appropriate torque specification for the thread type (BSP or JIC).
Compatibility: This fitting is specifically designed for use with 100R6 socketless hose. It is not compatible with braided hose or other hose types that do not have a smooth, push-on internal diameter suitable for barb engagement. The screw threads are available in BSP and JIC standards; verify your component's thread type before purchase.
Care: Clean the fitting with a damp cloth as needed. Avoid abrasive cleaners or solvents that could damage the plating. Periodically inspect the connection for any signs of wear or degradation, especially if exposed to harsh chemicals or extreme temperatures.
