Best current price£50.00from eBay
Shopping.co.uk recommended and popular offers
eBay£50.00Visit shop SRAM XX1 X-SYNC 2 Eagle 32T Chainring Direct Mount 3mm Boost Black Aluminium
Visit shop19 offers from £50.00 - £119.17
View price history by clicking the chart icon.
1 offer from £64.99
View price history by clicking the chart icon.
The SRAM Eagle X-Sync Direct Mount Chainring is designed for mountain bikers running 12-speed Eagle drivetrains who demand maximum chain retention and drivetrain efficiency. Utilizing the advanced X-SYNC 2 tooth profile, this chainring provides a smoother, quieter, and more durable interface for your chain, though it requires specific attention to boost offset requirements during installation to ensure proper alignment.
| Model Part Number | CW8030080 |
|---|---|
| Brand | SRAM |
The X-SYNC 2 profile is specifically optimized for SRAM Eagle chains to ensure maximum performance and retention.
The offset relates to the chainline. 3mm is for Boost frames (148mm spacing), while 6mm is typically for non-boost standard frames.
This chainring is specifically engineered for 12-speed Eagle systems; performance with other speeds is not guaranteed.
Replacement intervals depend on mileage and conditions, but you should replace it when the teeth show significant signs of hooking or wear.
Yes, it requires a SRAM-compatible direct mount chainring tool to loosen and tighten the locking ring.
Check your chain lubrication and ensure the chainring teeth are free of built-up debris. Also, verify that the chain is not cross-chained.
Check your derailleur clutch tension and ensure the chain length is correct for your specific frame setup.
Verify that you have installed the correct 3mm boost offset ring. An incorrect offset will misalign the chainline.
Installation requires a standard SRAM direct-mount chainring tool to remove and install the ring onto the crank spider. It is critical to confirm that your frame requires a 3mm boost offset, as choosing the incorrect offset will negatively impact your chainline and cause poor shifting performance. To maintain the chainring, inspect the teeth periodically for shark-finning or excessive wear. Clean the chainring during your regular drivetrain maintenance routine using a degreaser and a stiff-bristle brush to remove grit that can accelerate wear on both the chain and the tooth profile.
