SecureFix Direct Ratchet Tie Down Straps - 25mm - 0.8T - 5M - S Hook
SpecificationsLength: 5 MetresWidth: 25MMSafety Factor: 2:1Conforms To: EN12195-2 DIN60060 AS/NZS4...SpecificationsLength: 5 MetresWidth: 25MMSafety Factor: 2:1Conforms To: EN12195-2 DIN60060 AS/NZS4380Minimum Breaking Strain: 800KGProduct Code: SFRL2508T5S/02Product Weight: 1.02kg Two 5M 25MM Blue Ratchet Straps with S Hooks.These Ratchet Straps are 5 Metres in length and allows you to effortlessly and securely keep your cargo tightly strapped down. Ideal for light commercial vehicles such as vans, lorries and trucks.The straps have a width of 25MM and a minimum breaking strain of 800KG. On the end of the straps the robust S Hook allows you to easily find an anchor point for ratcheting. They're constructed from 100% Polyester with a steel ratchet, and it conforms to EN12195-2 DIN60060 AS/NZS4380 to ensure that you get the top quality of strap you can find. You can also use these straps on trailers, caravans, motorhomes etc for varying uses. There's no better solution to loose cargo, than these Ratchet Straps!This strap or straps are each supplied with a Certificate of Conformity. Please also note that if you require a custom length that we do not offer, if you contact us we may be able to supply you what you need.
This guide is for anyone needing to secure cargo in light commercial vehicles, on trailers, or in recreational vehicles. The SecureFix Direct Ratchet Tie Down Straps offer a reliable and straightforward solution for keeping items firmly in place, preventing movement and potential damage during transit. While highly effective for general use, users should be aware of the minimum breaking strain and ensure it meets their specific load requirements.
All features
Model Part Number
SFRL2508T5S/02
Brand
SecureFix Direct
Extended Product Information
FAQs
What is the minimum breaking strain of these straps?
The minimum breaking strain for each strap is 800KG (0.8 Tonne).
How long are the straps?
Each strap is 5 metres long.
What are the straps made of?
The straps are constructed from 100% polyester webbing with a steel ratchet mechanism and steel S hooks.
Are these straps suitable for heavy-duty loads?
With a 0.8 Tonne minimum breaking strain, these straps are ideal for light to medium loads. For heavier loads, please consult our range of higher-rated straps.
Do I need a Certificate of Conformity?
Yes, each strap is supplied with a Certificate of Conformity, which verifies its compliance with safety standards.
Can I get custom lengths?
If you require a custom length not offered, please contact us as we may be able to supply your specific needs.
How should I clean the ratchet straps?
Clean with mild soap and water, rinse thoroughly, and allow to air dry completely before use or storage.
Troubleshooting
Strap will not tighten
Ensure the strap is threaded correctly through the ratchet mechanism and that the ratchet is not jammed. Check for any debris obstructing the mechanism.
S hook is difficult to attach
Try a different anchor point or adjust the cargo position. Ensure the hook is not bent or damaged.
Webbing appears frayed or damaged
Discontinue use immediately. Damaged straps compromise safety and should be replaced.
Ratchet mechanism is stiff
Clean the mechanism to remove dirt or grit. Light lubrication may help, but avoid over-application that can attract dirt.
Pros and Cons
Pros
Easy to use and adjust for secure cargo fastening.
Durable construction ensures longevity and reliability.
Versatile for use in vans, trucks, trailers, and motorhomes.
Meets recognized international safety standards.
S Hooks provide a convenient and secure attachment method.
Cons
Minimum Breaking Strain of 800KG may not be sufficient for very heavy loads.
Not suitable for applications requiring extreme temperature resistance.
S-hooks might not fit all anchor point designs.
Setup, Compatibility & Care
Setup:
Identify suitable anchor points on your vehicle or trailer and on the cargo.
Thread the strap through or around the cargo, ensuring no sharp edges will chafe the webbing.
Connect one S hook to an anchor point.
Feed the free end of the strap through the ratchet mechanism.
Pull the strap taut by hand to remove slack.
Operate the ratchet handle up and down to tension the strap until the desired tightness is achieved. Ensure the ratchet is locked in place.
Connect the second S hook to another anchor point.
Compatibility:
Compatible with most light commercial vehicles, vans, trucks, trailers, caravans, and motorhomes.
Suitable for use with standard vehicle and trailer anchor points.
Care:
Inspect straps for wear, fraying, or damage before each use.
Clean straps with mild soap and water; rinse thoroughly and allow to air dry completely.
Store in a dry, cool place away from direct sunlight and chemicals.
Avoid using straps if damaged or if the safety factor is compromised.