Best current price£14.11from The Range
Shopping.co.uk recommended and popular offers
The Range£14.11Visit shop Jcp Fixings A4-316 Stainless Steel J-Fix Studs Plain Ended - M8 X 150 (Box Of 10) - Black
Visit shop40 offers from £14.11 - £97.98
View price history by clicking the chart icon.
The JCP Fixings J-Fix Studs are professional-grade, plain-ended fasteners engineered for maximum durability in high-strength anchor applications. Ideal for construction professionals and experienced DIY enthusiasts, these M12 x 200 studs are specifically optimized for use with chemical resin anchoring systems to ensure secure, long-lasting fixings in demanding masonry environments. While they offer superior load-bearing capacity, they require precise chemical resin application to achieve their full performance potential.
| Colour | Black |
|---|---|
| Model Part Number | 5014196031996 |
| Brand | JCP Fixings |
Yes, but they typically require a mesh sleeve to contain the chemical resin within the cavity.
The drilling depth depends on the chemical resin manufacturer's specifications; always consult the resin data sheet for embedment depths.
Yes, they are robustly constructed, though you should ensure the chemical resin used is also rated for exterior exposure.
Yes, they can be cut using a hacksaw or angle grinder, but ensure the end is cleaned and deburred afterward.
The plain-ended studs are sold as rods; ensure you purchase the appropriate M12 nuts and washers separately.
M12 refers to the metric thread diameter of 12 millimeters.
This often results from improper hole cleaning; ensure all masonry dust is removed before resin injection.
Reduce the volume of resin injected; the hole should be filled to approximately 2/3 depth to avoid excessive overflow.
Check that the hole diameter is correct and that the resin has not begun to harden prematurely.
To set up these studs, drill a hole of the diameter specified by your chosen chemical resin manufacturer. Use a wire brush and blow-out pump to remove all dust from the hole. Inject the resin from the back of the hole to prevent air pockets, then insert the M12 stud with a slow, twisting motion. Ensure the stud is aligned correctly before the resin gels. For care, avoid exposing these studs to environments that may cause rapid corrosion if the protective finish is compromised; for highly corrosive or marine environments, verify specific material grade requirements. Store in a dry, cool place to prevent oxidation prior to installation.
