Hydraulic Tube Bender - AirTech-UK - ST-Y999
Best current price£319.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£319.99Visit shop B&Q - St-Y999 Copper Tube Bender Hydraulic Tube Bender
Visit shopB&Q£319.99Visit shop All Offers
3 offers from £319.99
View price history by clicking the chart icon.
B&QB&Q - St-Y999 Copper Tube Bender Hydraulic Tube Bender
Free delivery in 1–3 days
£319.99
Visit shop
eBayHydraulic Tube Bender Kit – 1/4” to 7/8” Copper & Aluminium Pipe Bender – HVAC
Free delivery in 1–3 days
£319.99
Visit shop
Hydraulic Tube Bender Kit – 1/4” to 7/8” Copper & Aluminium Pipe Bender – HVACFree delivery in 1–3 days£319.99Visit shop →
Product Information
Full details
This AirTech-UK Hydraulic Tube Bender (ST-Y999) is designed for HVAC, refrigeration, and plumbing professionals who need to create precise, smooth bends in copper and aluminum tubing. Its key benefit is delivering wrinkle-free bends up to 90° with minimal effort, ensuring professional-looking installations and preventing pipe damage. A potential caveat is its weight, requiring adequate space for operation.
All features
| Model Part Number | ST-Y999 |
|---|---|
| Brand | AirTech-UK |
Extended Product Information
FAQs
What is the maximum bending angle this tool can achieve?
This hydraulic tube bender can achieve smooth bends up to 90 degrees.
What materials can this bender work with?
It is designed for bending soft copper and aluminum tubing.
How do I maintain the hydraulic system?
Keep the bending head and dies clean. Periodically inspect the hydraulic mechanism for leaks. Store the tool in a dry place to prevent corrosion.
What is the weight of the tool?
The tool weighs approximately 13.23 pounds.
Can this bender handle metric tube sizes?
Yes, the dies support both imperial (1/4" to 7/8") and approximate metric sizes (6mm to 22mm).
What happens if the tubing flattens during a bend?
Flattening usually indicates an incorrect die size or insufficient support. Ensure you are using the die that precisely matches the tubing's outer diameter and that the tube is seated correctly.
Troubleshooting
Tube kinks or flattens during bending.
Ensure the correct die size is selected for the tubing diameter. Verify that the tubing is correctly seated within the die. Check if the hydraulic pressure is being applied too quickly; try a slower, more controlled pump action.
Bender feels stiff or difficult to operate.
Check for any obstructions or debris in the bending mechanism or on the dies. Inspect the hydraulic system for proper fluid levels or potential leaks. Lightly lubricate the main pivot points if necessary.
Inconsistent bend angles.
Ensure the tubing is firmly held in place within the die. Mark your bend start and desired angle clearly on the tubing. Practice with scrap pieces to achieve consistent control over the hydraulic lever.
Die does not fit tubing properly.
Double-check the tubing's outer diameter against the specified sizes for each die. Ensure the correct die is being selected and properly inserted into the bending head.
Pros and Cons
Pros
- Delivers professional-grade, smooth bends without kinking or flattening.
- Hydraulic assistance reduces user fatigue during repetitive bending tasks.
- Wide range of die sizes accommodates diverse project requirements.
- Durable materials ensure longevity and resistance to corrosion.
- Enhances installation quality and system reliability.
Cons
- Heavier than manual benders, potentially impacting portability for some users.
- Requires a learning curve to master precise angle control.
- May require more setup time due to die changes.
- Operating space is needed for the hydraulic lever action.
- Not suitable for extremely thick-walled or hardened materials.
Setup, Compatibility & Care
Setup:
- Select the appropriate die size from the kit that matches the outer diameter of the tubing you intend to bend.
- Install the selected die onto the bending head of the tool, ensuring it is securely seated.
- Position the tubing within the die according to the tool's markings for the desired bend start point.
Compatibility:
This tube bender is designed for soft copper and aluminum tubing commonly used in:
- Air conditioning systems
- Refrigeration units
- Plumbing applications
- Automotive HVAC systems
It supports tubing sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" (6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 22mm).
Care:
- After each use, wipe down the bending head and dies with a clean, dry cloth to remove any debris or residue.
- Periodically inspect the hydraulic mechanism for leaks or damage.
- Store the tool in a dry environment to prevent corrosion, especially on the aluminum alloy components.
- Lubricate moving parts sparingly if resistance is felt, using a light machine oil.