Shopping.co.uk

Festo MS Filter Regulator - 40µm - G 1/4 - Manual

Festo MS Filter Regulator - 40µm - G 1/4 - Manual

This air preparation combination unit offers comprehensive compressed air treatment in a compact 4...

Best current price£328.56from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£328.56Visit shop

Festo Maintenance Device Combination MSB4-1/4:C3:J1:D14-WP Service Unit 8025358

Visit shop

All Offers

2 offers from £328.56 - £379.57

View price history by clicking the chart icon.

eBayFesto Maintenance Device Combination MSB4-1/4:C3:J1:D14-WP Service Unit 8025358
£27.62 delivery
£328.56
Visit shop
Tameson UKFesto Air Preparation Unit G1/4'' 4-10Bar 1400L/Min 40Μm - 8025358
Free delivery in 1–3 days
£379.57
Visit shop

Product Information

Full details

This Festo MS Filter Regulator is designed for industrial applications requiring comprehensive compressed air treatment in a compact 40 mm width. It's ideal for users needing reliable pneumatic system performance with integrated filtration, pressure regulation, and safety features. A potential caveat is the manual drain, which requires periodic user attention. Key features include a 40 µm filter, G 1/4 pneumatic connection, 1400 l/min flow rate, and a pressure regulation range of 4-10 bar.

All features

Model Part NumberMSB4-1/4:C3:J1:D14-WP
BrandFesto

Extended Product Information

FAQs

What is the filtration level of this unit?

The filtration level is 40 micrometers (40 µm).

What is the maximum flow rate?

The standard nominal flow rate is 1400 liters per minute (l/min).

How do I adjust the output pressure?

You can adjust the output pressure by turning the black knob on top of the regulator. Push the knob down to lock the setting.

How often should I drain the filter bowl?

The frequency depends on the humidity of your compressed air supply and system usage. It is recommended to check and drain the bowl regularly, for example, at the end of each shift or daily.

Can I install a pressure gauge with this unit?

Yes, this unit features a G 1/4 port specifically for pressure gauge installation.

What is the pressure range this regulator can handle?

The pressure regulation range is from 4 to 10 bar.

Does this unit require electrical power?

No, this is a pneumatic component and does not require electrical power to operate.

Troubleshooting

No air output from the unit.

Ensure the shut-off valve is open and the inlet air supply is connected and pressurized. Check that the flow direction is correct.

Inability to regulate pressure to the desired level.

Verify the inlet pressure is above the set outlet pressure. Check for leaks in downstream components. Ensure the regulator knob is properly adjusted.

Excessive water in the filter bowl.

Ensure the manual drain is functioning correctly and is operated regularly. Check for significant moisture in the incoming compressed air supply.

Soft start valve not engaging properly.

Confirm the system is not already pressurized before startup. Check for any obstructions in the soft start mechanism.

Pros and Cons

Pros

  • Combines multiple air preparation functions (filter, regulator, soft start, shut-off) into a single unit, saving space and installation time.
  • Offers reliable protection for pneumatic equipment with its 40 µm filter.
  • Provides stable and adjustable air pressure suitable for a wide range of applications.
  • Compact design makes it suitable for crowded control cabinets or machine footprints.
  • Includes essential safety features like a shut-off valve and soft start.

Cons

  • Manual drain requires regular operator attention to prevent condensate buildup.
  • The 40 µm filtration may not be sufficient for extremely sensitive applications requiring finer filtration.
  • Maximum ambient operating temperature of +50°C limits use in very high-temperature environments.
  • Minimum operating pressure of 0.8 bar means it's not suitable for very low-pressure systems.

Setup, Compatibility & Care

Setup:

  1. Identify the correct flow direction indicated on the unit.
  2. Connect the compressed air supply to the inlet port (G 1/4).
  3. Connect the downstream pneumatic device to the outlet port (G 1/4).
  4. Install a pressure gauge (if desired) into the designated gauge port.
  5. Adjust the regulated pressure using the regulator knob, typically after ensuring the system is under load.

Compatibility:

  • Pneumatic Connection: G 1/4 thread size.
  • Operating Pressure: Suitable for systems operating between 0.8 and 10 bar.
  • Temperature: Ambient operating temperature range of -0 to +50°C.

Care:

  • Filter Maintenance: Periodically inspect the filter bowl for accumulated condensate. Manually drain the bowl by opening the manual drain valve when necessary.
  • Cleaning: Clean the exterior of the unit with a slightly damp cloth. Avoid using solvents or abrasive cleaners.
  • Inspection: Regularly check the pressure gauge (if installed) and connections for any signs of leaks or damage.

Price History

DatePrice
Visit shop