Tikkurila Luja 7 - Durable Anti Mould Matt Paint - 3 Litres

Clean the surface thoroughly, removing any dirt, grease, or loose particles. If there's mould, clean it with a mould remover. Sand glossy surfaces. Prime the surface if needed, especially on new or absorbent surfaces.

Yes, Tikkurila Luja 7 is suitable for use in showers, provided the surface is properly prepared and primed. Ensure good ventilation.

Generally, two coats are recommended for optimal coverage and durability. However, the exact number may vary depending on the color and the condition of the surface.

You can clean the painted surface with a mild detergent and a damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.

Yes, Tikkurila Luja 7 is water-based with ultra-low VOCs and carries the M1 ecolabel, indicating better indoor air quality.

Yes, but it's essential to prime the tiles with a suitable adhesive primer first to ensure proper adhesion.

Tikkurila Luja 7 has a Class 1 scrub rating, meaning it can withstand frequent cleaning and scrubbing with chemical detergents without affecting color fastness.

You can use this paint in humid and wet areas such as bathrooms, kitchens, saunas, and swimming pools. It is also suitable for high-traffic areas and ceilings.

Ensure the surface is properly prepared (clean, dry, and primed if necessary). Sand glossy surfaces to improve adhesion.

Use the correct application technique (e.g., apply a thin, even coat) and the recommended applicator type. Avoid overworking the paint.

Ensure all mould is thoroughly removed before painting and use a suitable anti-mould primer or cleaner. Improve ventilation in the area.

Make sure you applied the correct number of coats. Allow the paint to dry completely. Consider the color of the existing surface and whether a primer was needed.