Plumbright Soil 92 Degree Double Socket Access Bend - 110mm - Light Grey

The primary purpose is to create a 92-degree change in direction in a 110mm soil pipe while providing a convenient access point for inspection and clearing of blockages.

The fitting is made from PVC-U (Unplasticized Polyvinyl Chloride), a durable and corrosion-resistant plastic commonly used for drainage systems.

It meets EN1329-1 and EN1566-1 standards, which relate to PVC pipes and fittings for soil, waste, and drainpipe systems.

While it is primarily designed for soil and waste systems, it can typically be used for rainwater systems as long as the pipe size and material compatibility are correct.

The access port is sealed with a threaded cap, which should be tightened securely after any inspection or clearing work is completed.

It is recommended to use a solvent cement specifically designed for PVC-U pipes and fittings. Ensure proper application and curing times.

Yes, PVC-U is suitable for underground use in soil and waste drainage systems when installed correctly according to local building regulations and best practices.

Ensure the pipe was fully inserted into the socket and that sufficient solvent cement was applied and allowed to cure properly. Re-joint if necessary, ensuring proper surface preparation and application.

Check for any obstructions or damage inside the socket or on the pipe end. Ensure both components are clean and free from burrs. Lightly chamfer the pipe end if needed.

Clean the threads of the access cap and the fitting. Apply a small amount of silicone lubricant to the threads if necessary. Ensure the cap is screwed on straight and tightened appropriately.