APURE BIDET A121 - Hot and Cold Water Bidet
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The APURE BIDET A121 is a non-electric bidet attachment designed for enhanced personal hygiene and comfort. It's ideal for individuals seeking a cleaner alternative to toilet paper or those needing assistance with personal care due to mobility limitations. A potential caveat is the need for user adjustment to achieve the desired water temperature and pressure. Key features include high-quality components, adjustable water pressure, a self-cleaning nozzle, and the ability to use warm water from your home's plumbing.
All features
| Model Part Number | AB121 |
|---|---|
| Brand | APURE BIDET |
Extended Product Information
FAQs
Is this bidet electric?
No, the APURE BIDET A121 is a non-electric bidet attachment. It uses your home's existing water pressure and can utilize your hot water supply.
How do I get warm water?
The bidet uses your home's hot water line. Before use, you can run warm water through the system by setting the knob to 'Self-cleaning' and triggering the 'Hot' lever to drain cold water from the pipes.
Will this bidet fit my toilet?
The APURE BIDET A121 is designed to fit most standard two-piece toilets. It is recommended to measure your toilet's dimensions to ensure compatibility, especially for one-piece toilets or non-standard seats.
How do I control the water pressure?
Water pressure is controlled by gently and slowly pulling the lever. Start slowly and adjust until you reach your desired comfort level.
How do I clean the bidet nozzle?
The bidet features a self-cleaning function. Activate this setting before and after each use to keep the nozzle hygienic. The nozzle retracts when not in use.
What are the toilet seat bumpers for?
The included 4-piece bumper set is designed to provide a small gap between the toilet seat and the bowl, offering extra stability and preventing the seat from shifting.
What is the operating pressure range?
The bidet is designed to operate within a pressure range of 50 ± 20 PSI.
Troubleshooting
No water or low water pressure
Check that the water supply valve is fully open. Ensure the T-adapter and hoses are securely connected and not kinked. Verify that the control knob is set to the desired function (Wash/Women).
Water leaks from connections
Ensure all connections are tight. Check that rubber washers are properly seated in the fittings. Turn off the water supply and re-tighten connections.
Water temperature is too cold
Ensure the hot water supply valve is open. Perform the warm-up procedure by switching to 'Self-cleaning' and 'Hot' to flush cold water from the pipes before use.
Nozzle is not retracting or extending properly
Activate the self-cleaning function. Ensure there are no obstructions around the nozzle area. Gently try to retract/extend manually if safe to do so, but avoid forcing it.
Pros and Cons
Pros
- Improves personal hygiene significantly compared to toilet paper.
- Offers a more comfortable cleansing experience with adjustable warm water.
- Durable construction with metal and high-strength ABS components.
- Promotes independence for users with limited mobility.
- Easy to install and operate for most users.
Cons
- Warm water temperature is dependent on existing home plumbing, not actively heated.
- Requires a learning curve to master pressure and temperature control.
- Non-electric operation means no heated seat or air dryer.
- May not fit all toilet designs without careful measurement.
Setup, Compatibility & Care Instructions
Setup:
- Ensure your toilet has both hot and cold water supply lines accessible near the tank.
- Turn off the water supply to the toilet.
- Disconnect the existing water supply hose from the toilet tank.
- Install the included metal T-adapter.
- Connect the braided steel hose from the T-adapter to the bidet attachment.
- Connect the original water supply hose (or a new one if needed) to the T-adapter.
- Attach the bidet to your toilet seat.
- Turn the water supply back on and check for leaks.
Compatibility:
- Fits most standard two-piece toilets. May require additional verification for one-piece toilets or specific seat designs.
- Requires accessible hot and cold water connections.
Care:
- Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners.
- Periodically activate the self-cleaning function to maintain nozzle hygiene.
- Ensure the nozzle is retracted after use to protect it.