Shopping.co.uk

Davant Solvent Waste 92.5 Swept Tee - 50mm Black

Davant Solvent Waste 92.5 Swept Tee - 50mm Black

This 50mm black plastic solvent waste 92.1/2 swept Tee is ideal for use in plumbing applications w...

Best current price£2.51from City Plumbing GB

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
City Plumbing GB£2.51Visit shop

Plumbright Black Solvent Weld Waste 92.5 Degree Swept Tee 50Mm Pwst50b

Visit shop

One Offer

1 offer from £2.51

View price history by clicking the chart icon.

City Plumbing GBPlumbright Black Solvent Weld Waste 92.5 Degree Swept Tee 50Mm Pwst50b
Free delivery in 1–3 days
£2.51
Visit shop

Product Information

Full details

This guide is for plumbers and DIY enthusiasts using the Davant 50mm Black Solvent Waste 92.5 Swept Tee. It provides a reliable connection point for waste pipes, offering great value and quality. This tee is designed for specific plumbing applications; ensure proper sizing and compatibility before installation.

All features

Model Part Number50mm Black
BrandDavant

Extended Product Information

FAQs

What type of solvent cement should I use?

Use a solvent cement specifically designed for the type of plastic used in your waste pipes. Check the product label for the correct type.

Is this tee suitable for hot water?

Yes, it is suitable for use with hot water, but always check the temperature rating of the specific plastic.

Can I use this tee for outdoor applications?

Yes, but ensure the installation is protected from direct sunlight and extreme weather conditions.

How do I measure the pipe size?

Measure the outside diameter of your existing waste pipe. This tee is designed for 50mm pipes.

What is the angle of the swept tee?

The tee has a 92.5-degree swept angle for optimal flow.

Where can I find the product specifications?

Product specifications are available on the packaging or from the manufacturer's website.

Troubleshooting

Leakage at the joint after installation.

Check the connection. Ensure that enough solvent cement was used and that the pipes were fully inserted into the tee. Re-apply solvent cement if necessary, and ensure a proper seal.

Slow drainage or blockage.

Check the pipe for any obstructions. Clear any blockages. Ensure the tee is installed at the correct angle to facilitate proper flow.

Pros and Cons

Pros

  • Durable plastic construction ensures long-term use.
  • The swept design minimizes the risk of blockages and improves flow.
  • Solvent weld connections provide a reliable, watertight seal.
  • Cost-effective solution without compromising on quality.

Cons

  • Requires solvent cement for installation (sold separately).
  • Only compatible with 50mm pipes.
  • Plastic material may be susceptible to damage from extreme heat or cold if not installed correctly.

Setup, Compatibility & Care

Setup:

  1. Ensure all pipe ends are clean and free of debris.
  2. Apply solvent cement to both the pipe and fitting surfaces.
  3. Insert the pipe fully into the tee, twisting slightly to ensure even distribution of the cement.
  4. Hold the connection for a few seconds to allow the cement to set.
  5. Allow the joint to cure according to the solvent cement manufacturer's instructions before testing.

Compatibility:

  • The Davant 50mm Black Solvent Waste 92.5 Swept Tee is designed for use with 50mm waste pipes.
  • Ensure compatibility with the type of plastic used in your existing pipes.
  • Use appropriate solvent cement specifically designed for the plastic type.

Care:

  • Regularly check for leaks at the joints.
  • Avoid placing heavy objects directly on the pipes.
  • Protect the pipes from extreme temperatures to prevent damage.

Price History

DatePrice
Visit shop