Best current price£0.85from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£0.85Visit shop Metalmate® Metalmate Pozi Pan Head Machine Screw M5 X 20Mm Memmspan0520
Visit shop
B&Q£4.46Visit shop B&Q - Memmspan0520 Machine Screw Pozi Compatible Pan Head Zp M5 X 20mm Box 25 Memmspan0520
Visit shop20 offers from £0.85 - £5.77
View price history by clicking the chart icon.
This guide is for DIY enthusiasts, builders, and tradespeople requiring reliable fasteners. The METALMATE® M5 x 50mm machine screws offer a secure and durable hold for various applications, ensuring structural integrity. A potential consideration is that these are sold in boxes of 25, which might be more than needed for small projects.
| Colour | Silver |
|---|---|
| Model Part Number | MEMMSPAN0550 |
| Brand | METALMATE |
Pozi drive screws have four additional small slots between the main cross-slots, designed to prevent the driver bit from camming out (slipping). Phillips screws only have the main cross-slots. Using the wrong type of bit can damage the screw head.
Yes, the zinc-plated finish provides good corrosion resistance, making them suitable for many outdoor applications. However, for highly corrosive environments, additional protective measures might be needed over time.
For an M5 screw in wood, a pilot hole of approximately 3.5mm to 4.0mm is generally recommended, depending on the hardness of the wood. It's best to test on a scrap piece first.
Each box contains 25 METALMATE® Machine Screws.
They are suitable for a wide range of materials, including wood, plastic, and metal, provided the material can be tapped to accept an M5 thread or used with an M5 nut/threaded insert.
The magnetic properties of zinc-plated steel screws can vary. While many are slightly magnetic, their primary function is mechanical fastening, not magnetic attraction.
Ensure you are using the correct M5 size and that the receiving thread (tapped hole or nut) is clean and undamaged. Verify you are not cross-threading. For wood, check that the pilot hole is the correct size.
Confirm you are using a Pozi drive (PZ) bit, not a Phillips (PH) bit, as they are similar but not interchangeable. Ensure the bit is fully seated in the screw head and apply firm, consistent pressure.
Use the correct size and type of Pozi driver bit. Ensure the bit is firmly seated and apply steady pressure during insertion. If minor damage has occurred, try using a slightly larger bit or a screw extractor.
While zinc-plated screws offer corrosion resistance, extreme environments can still cause degradation. Clean the affected area and consider applying a protective coating if the screw is in a critical application.
Setup: To use these screws, ensure you have a pozi drive screwdriver or drill bit that matches the `PZ2` size for optimal performance and to prevent stripping the drive head. Select an appropriate pre-drilled hole for your material. The M5 thread requires a corresponding M5 tapped hole or nut for a secure connection. For softer materials like wood, a pilot hole slightly smaller than the screw's core diameter is recommended.
Compatibility: These are M5 machine screws, meaning they are designed to thread into an M5 tapped hole, a nut, or a threaded insert. They are compatible with standard M5 nuts and washers. The Pozi drive is designed to work with Pozi-compatible tools.
Care: To maintain the corrosion resistance of the zinc plating, avoid prolonged exposure to highly acidic or alkaline environments. If exposed to harsh conditions, consider using additional protective coatings if necessary. Store screws in a dry environment to prevent premature corrosion.
