Hycote Colour Touch Up Brush Paint - Gloss Black - 12.5ml

The surface must be clean, dry, and free from grease, wax, or dirt. Lightly sanding any rough edges around the damage can help with adhesion and a smoother finish.

It is generally recommended to apply thin, even coats. Allow each coat to dry for at least 30 minutes before applying the next, and apply as many thin coats as needed to achieve full coverage.

Yes, this paint is suitable for use on plastics, as well as metals, wood, and ceramics.

The paint is fast-drying to the touch, typically within 30 minutes. However, full curing can take 24 hours or more, depending on environmental conditions. Avoid washing the area until fully cured.

When stored correctly in a cool, dry place with the lid tightly sealed, the paint can last for several years. Check for any signs of thickening or separation before use.

A primer is recommended for bare metal or deep scratches to ensure adhesion and prevent corrosion. A clear lacquer can be applied over the dried touch-up paint to provide extra protection and match the gloss level of the original finish.

Ensure the brush is fully immersed in the paint and that the paint has been thoroughly mixed. Tap the brush gently on the rim of the pot to remove excess.

Apply paint in thin, even coats. Avoid applying too much pressure. If the finish is uneven, allow it to dry and then apply another thin coat to level it out. Practice on a non-visible area first if possible.

Ensure application is in a well-ventilated area with moderate temperature. Excessive humidity or very cold conditions can slow drying times. Check for incompatible primers or base coats.

Verify that the correct paint code for your vehicle was selected. Colours can vary slightly due to age and sun exposure of the original paint. Ensure the paint was thoroughly mixed.