Laser Tools Square Profile Universal Lifting Pad - 100 x 100 x 25mm

The lifting pad is manufactured from solid Polyurethane (PU), which is known for its durability and resistance to oils.

The dimensions are 100mm x 100mm x 25mm (Length x Width x Thickness).

It is designed for universal use with scissor lifts, floor recessed lifts, and standard 2 & 4 post lifts. However, the square profile requires compatibility with the lift arm design.

This listing is for a single lifting pad. A set of 4 is also available under Laser Part No. 62586.

Yes, it is highly durable and oil resistant due to its solid Polyurethane construction.

The lifting pad weighs approximately 0.23Kg.

You can wipe it clean with a damp cloth after use. Avoid using harsh solvents.

Verify that the lift arm has a corresponding square recess designed for this pad. Some lift arms may require specific adapters or may not be compatible with this square profile design. Ensure the pad is seated correctly within any available slots.

Ensure the pad is correctly positioned and centered on the designated lifting point. Check that all four lift points are engaged securely and that the lift itself is level and on a stable surface.

Inspect the pad for deep cuts, excessive gouging, or material degradation. If significant wear is present, replace the pad immediately to ensure continued safety and effectiveness. Consider purchasing the set of 4 (Part No. 62586) for consistent protection.