Drennan Polemaster Super Slick Internal Bungee Bushes - 3.8mm

The primary benefit is the reduction of wear on your pole elastic by providing an extended, low-friction PTFE surface at the pole tip, which also smooths elastic stretch and recovery.

Refer to the provided size guide. For example, a 3.8mm internal diameter bush is rated for Pink/Red bungee, while a 2.0mm is for Green bungee.

They are highly beneficial for most pole fishing, especially when targeting larger or more powerful species that put significant strain on the elastic. Their main function is elastic protection and smooth operation.

The product information states there are two bushes per packet.

These are 'Internal Bungee Bushes,' designed to be fitted inside the pole section at the tip. They are not designed for external elastic setups.

They are made from pure white PTFE (Polytetrafluoroethylene), known for its exceptionally low friction properties.

Ideally, they should fit snugly. Gluing is usually only necessary if the fit is loose, and should be done sparingly with a specialized adhesive.

Apply a small amount of PTFE tape around the outside of the bush before inserting it, or use a small amount of pole bush adhesive. Allow adhesive to cure fully before use.

Ensure the inside of the bush is clean and free from debris. Check that the bush size is appropriate for the elastic diameter; a bush that is too small can constrict the elastic.

Verify that the correct bush size is being used for the elastic rating. If targeting very powerful fish, consider a slightly larger elastic and corresponding bush size for better durability.