Best current price£15.00from Wex Photo Video
Shopping.co.uk recommended and popular offers
Wex Photo Video£15.00Visit shop Blackmagic DIN 1.0/2.3 to DIN 1.0/2.3 Cable 1m Black
Visit shop1 offer from £15.00
View price history by clicking the chart icon.
The Blackmagic Design DIN 1.0/2.3 to DIN 1.0/2.3 cable is an essential accessory for professional videographers and broadcast technicians who need a secure, stable SDI connection for compact equipment like the Micro Studio Camera. Designed to support high-quality 6G-SDI signals, this cable provides reliable data transmission in demanding production environments, though users should note that the DIN 1.0/2.3 connector type requires careful handling compared to standard full-sized BNC connections.
| Colour | Black |
|---|---|
| Model Part Number | BC0109 |
| Brand | Blackmagic Design |
Yes, this cable supports 6G-SDI, which is capable of transmitting Ultra HD (4K) video signals.
No, this uses the DIN 1.0/2.3 micro connector, which is significantly smaller than a standard full-size BNC connector.
It is designed for connecting compact devices like the Blackmagic Micro Studio Camera to other professional broadcast equipment.
Use a blast of compressed air to remove dust; avoid using liquid cleaners or abrasive materials inside the connector barrel.
Yes, it features professional-grade shielding to minimize electromagnetic interference for high-quality signal transmission.
Check that the DIN connector is fully seated in the port and ensure there is no debris inside the camera or cable connection point.
Verify that your device uses a DIN 1.0/2.3 connection; if the device uses full-sized BNC, you will need a separate adapter.
Ensure the cable has enough slack to accommodate camera movement and use cable ties to relieve strain on the connector ends.
To ensure optimal performance, verify that your device hardware specifically lists support for DIN 1.0/2.3 connectivity. When connecting, align the connector carefully with the port to avoid bending the center pin. Press firmly until it clicks or seats fully into the socket. To disconnect, pull from the connector housing rather than the cable jacket to prevent internal wire strain. Avoid sharp bends near the connector heads, as this can degrade the 6G-SDI signal quality over time. Store the cable loosely coiled and away from heavy equipment that could crush the connectors.
