Shopping.co.uk

Maston Car-Rep Auto Spray Paint - Black - 500ml

Maston Car-Rep Auto Spray Paint - Black - 500ml

Achieve a professional-looking finish on your automotive projects with this high-quality spray pai...

Best current price£9.19from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

7 offers from £9.19 - £40.19

View price history by clicking the chart icon.

eBayMaston Car-Rep Auto Spray Paint Black Matt Acryl 500ml
Free delivery in 1–3 days
£9.19
Visit shop

Product Information

Full details

The Maston Car-Rep Auto Spray Paint in matte black is designed for automotive enthusiasts and DIY restorers looking to achieve a professional, durable finish on metal surfaces. Its key benefit lies in the high-performance formula that provides robust protection against corrosion, chemical exposure, and UV damage, making it ideal for exterior and under-the-hood components. While it offers excellent coverage, users should note that as a fast-drying aerosol, it requires careful technique and multiple thin coats to avoid runs and achieve an even texture.

All features

ColourBlack
Model Part NumberCR01001
BrandMaston
Container Volume500ml

Extended Product Information

FAQs

Can I use this on plastic bumpers?

This paint is primarily formulated for metal. For plastics, use an appropriate adhesion promoter or plastic primer first.

Does this paint require a clear coat?

No, this is a self-contained matte finish, though you may apply a matte clear coat if extra mechanical protection is desired.

How long should I wait between coats?

Because it is a fast-drying formula, you can usually apply additional coats within 10-15 minutes, depending on the ambient temperature.

Is the finish heat resistant?

It provides standard automotive chemical and corrosion resistance, but it is not intended for use on exhaust manifolds or high-heat engine components.

How do I ensure the best adhesion?

Proper surface preparation is key. Use a fine-grit sandpaper (400-600 grit) to scuff the surface and degrease thoroughly.

Troubleshooting

Paint is running or sagging

You are applying the coats too heavily. Increase the distance from the surface and use thinner, more frequent passes.

Finish looks textured or rough

The nozzle is likely too far from the surface, causing the paint to dry before it lands. Move closer to the workpiece.

Nozzle is clogged

Remove the nozzle and soak it in a solvent like acetone or paint thinner, then use a thin wire to clear the tip.

Pros and Cons

Pros

  • Resistant to UV rays, chemicals, and corrosion
  • Provides a consistent matte black finish
  • Shelf life of 60 months ensures long-term storage
  • No waste due to unlimited pot life formula

Cons

  • Requires proper surface preparation for adhesion
  • Fast drying time leaves little room for error when spraying
  • Limited to one specific matte black color

Setup, Compatibility & Care

  1. Preparation: Sand the target surface to ensure mechanical adhesion and clean thoroughly with a wax and grease remover.
  2. Environment: Apply in a well-ventilated area away from direct wind or excessive dust. Optimal application occurs between 15°C and 25°C.
  3. Application: Shake the can vigorously for at least two minutes before starting. Test on a scrap piece of cardboard to verify flow and color match.
  4. Cleanup: Clear the nozzle after use by holding the can upside down and spraying for two seconds until clear gas emerges.
  5. Storage: Keep the container in a cool, dry place to maintain the 60-month shelf life.

Price History

DatePrice
Visit shop