Setup, Compatibility & Care
Compatibility Check: Before purchasing, carefully compare the provided specifications and images with your existing cooker hood light bulb and lens. Verify that your cooker hood model number is listed and that the dimensions (Outer Diameter: 67mm) are suitable. Ensure your current bulb uses a similar connection type.
Installation:
- Safety First: Always ensure the cooker hood is switched off at the mains power supply before attempting any replacement.
- Access the Bulb: Depending on your model, you may need to carefully remove the existing lens or light fixture cover. This might involve unscrewing small fasteners or gently prying plastic clips.
- Remove Old Bulb: Once the lens is removed, carefully unscrew the old bulb. If it's a different type of fitting, consult your cooker hood manual.
- Install New Bulb: Gently screw in the new SPARES2GO LED bulb.
- Replace Lens: Reattach the lens or light fixture cover securely.
- Test: Restore power to the cooker hood and test the new light.
Care: These LED bulbs are designed for minimal maintenance. Should they require cleaning, ensure the power is disconnected. Wipe gently with a dry or slightly damp microfiber cloth. Avoid using abrasive cleaners or excessive moisture.