Frenchic Finishing Coat

It dries to a clear satin finish, enhancing the color beneath with a subtle sheen.

A minimum of two coats is required for optimal protection and durability. More coats may be applied for enhanced protection on high-wear surfaces.

Yes, Frenchic Finishing Coat is EN71-3 certified, making it safe for use on children's toys and furniture.

Yes, it is suitable for both interior and exterior use, providing durable protection against the elements.

A 500ml bottle will typically provide coverage of approximately 7-8m² per coat, though this can vary depending on the porosity of the surface.

Allow each coat to dry completely before applying the next. Info needed: [specific drying time]. Generally, touch dry within 1-2 hours, but recoat time can be longer depending on environmental conditions.

While optimized for the Frenchic Original Artisan Range, this water-based finishing coat can generally be used over other well-cured, water-based paints. Always perform a small patch test in an inconspicuous area first to ensure compatibility and desired results.

Ensure you are applying thin, even coats. Avoid overworking the product and maintain a wet edge. A high-quality synthetic brush or foam roller can help achieve a smoother application. Ensure the surface is completely clean before starting.

This often indicates over-application or insufficient drying time. Apply thinner coats and allow each coat to dry completely, ideally in a well-ventilated area, before applying the next. Humidity can also prolong drying times.

While the Finishing Coat helps prevent bleed-through, very stubborn stains or highly porous woods might require an additional dedicated stain-blocking primer before painting or sealing. Apply another thin, even coat of the Finishing Coat to see if it resolves the issue.