Loops 2 Gang Double 45A DP Switch & Neon - Polished Chrome & Grey Trim Vertical Rocker

This Loops switch requires a standard UK double-gang backbox, measuring approximately 145mm x 86mm.

While it can technically control lighting, its 45A rating is typically suited for higher-load circuits. Standard light switches are often sufficient for basic lighting.

DP stands for Double Pole. It means the switch disconnects both the live and neutral wires simultaneously, providing a more complete isolation of the circuit.

Typically, the neon indicator illuminates when the switch is in the 'on' position, indicating that power is being supplied to the connected circuit. Always refer to the specific wiring diagram for confirmation.

Use a soft, slightly damp cloth. Avoid harsh chemicals or abrasive materials to prevent damage to the finish.

This switch is designed for indoor use only and is not rated for outdoor weather exposure.

Loops offers a wide range of wall plates and wiring accessories in matching finishes. Contact Loops or check their product catalog for the complete suite.

Ensure the circuit breaker is on and check all wiring connections to the switch terminals. Verify that power is being supplied to the circuit.

Confirm that the switch is in the 'on' position and that the neon indicator is correctly wired. Check the power supply to the circuit and ensure the neon bulb itself is functional.

If stiff, check for obstructions or improper mounting. If loose, tighten the mounting screws securing the switch to the backbox. Do not overtighten.

This could indicate a loose connection or that the switch is overloaded. Immediately turn off the power, check all connections, and ensure the load does not exceed the 45A rating. Consult a qualified electrician if the problem persists.