Best current price£9.71from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.71Visit shop B&Q - PortasolCollet & Sleeve For Superpro 125 Gas Soldering Iron
Visit shop2 offers from £9.71
View price history by clicking the chart icon.
The PORTASOL Collet & Sleeve kit (SPT-18-BPSSD02010) is an essential replacement component designed specifically for professionals and hobbyists who rely on the SuperPro 125 gas soldering iron for precision electronics work. This kit restores a secure, stable fit for soldering tips, ensuring consistent heat transfer and operational safety, though it is strictly compatible only with the SuperPro 125 model and requires careful installation to avoid cross-threading.
| Model Part Number | SPT-18-BPSSD02010 |
|---|---|
| Brand | PORTASOL |
No, this specific kit is engineered exclusively for the SuperPro 125 model.
Generally, you can install the collet by hand, though a pair of pliers may be needed to remove a stubborn, seized old collet.
Ensure you are not cross-threading during installation. Always start the thread by turning the collet counter-clockwise until you feel a 'click' to align the start of the threads.
Replacement is recommended if you notice a loose fit, stripped threads, or if the metal shows significant signs of thermal warping.
The kit weighs approximately 0.61 pounds.
Ensure the sleeve is seated correctly behind the collet and that no debris is trapped in the threads.
Clean the threads on the soldering iron body with a soft wire brush and ensure the collet is perfectly aligned before turning.
Verify that the soldering tip is fully inserted and the collet is tightened down to compress the sleeve against the base of the tip.
This kit is exclusively compatible with the PORTASOL SuperPro 125 gas soldering iron. To install, unscrew the existing damaged collet using pliers if necessary, ensuring not to force the threads. Slide the new sleeve into position and tighten the collet securely by hand; avoid over-tightening with tools, as this can damage the fine threads of the gas assembly. Maintenance involves occasionally checking the collet for signs of oxidation or stripping, especially if you frequently switch between different tip profiles. Always keep the threads clean of flux residue to ensure the collet screws on and off smoothly.
