Makita Drill Driver - 18V LXT Li-ion - 6.35mm - 1/4" Hex - 2 x 5.0Ah

This driver drill is designed for 6.35mm (1/4") hex shank bits. It is not designed for standard round shank drill bits unless they have a 1/4" hex adapter.

Battery life depends on the application. A 5.0Ah battery typically provides extended run time, suitable for a full day's work for many common tasks, but heavy drilling or driving will consume power faster.

Please refer to the manufacturer's warranty documentation for specific details. Makita typically offers a warranty on their power tools.

No, this is a driver drill designed for driving screws and drilling holes. For heavy-duty demolition, a rotary hammer or demolition hammer would be more appropriate.

This drill can be used for light masonry drilling with appropriate masonry bits and the correct gear setting. For frequent or heavy masonry work, a hammer drill or rotary hammer is recommended.

Brushless motors are maintenance-free regarding brushes. Ensure the tool's air vents remain clear of dust and debris to allow for proper cooling, which helps prolong the motor's life.

Ensure the battery is fully charged and properly inserted. Check if the battery contacts are clean.

Ensure the hex shank bit is fully inserted into the chuck and that the chuck is securely tightened. Verify the bit is not damaged.

The battery may be low on charge; try a fully charged battery. Check for any blockages in the air vents or chuck area. The brushless motor might be overheating; allow it to cool down.

Check the forward/reverse rotation switch. Ensure it is not stuck between settings. Move the switch firmly to the desired direction.