Sonax Xtreme Brilliant Wax 1 Hybrid - 250ml

The protection typically lasts for approximately 6 to 8 washes, depending on environmental conditions and washing frequency.

It is best suited for new, nearly new, or pre-treated paintwork. It does not contain abrasives, so it's not designed to correct or restore heavily weathered paint.

The Lotus Effect refers to the strong water-repellent property that causes water droplets to bead up and roll off the surface, taking dirt with them, thus helping to keep the car cleaner.

No, this product is designed for glossy paint finishes and should not be used on matte or satin surfaces.

Reapplication is recommended after the protective layer wears off, typically around the 6-8 wash mark, or when the water-repellency diminishes.

No, this liquid hard wax can be applied by hand using an applicator pad or a soft microfiber cloth. A machine polisher is not required.

You may have applied the wax too thickly or not allowed it to haze sufficiently. Apply a thinner layer and ensure it hazes before buffing. Ensure you are using a clean, dry microfiber cloth for buffing.

The protection may be degrading after multiple washes. Reapply the wax according to the instructions. Ensure the surface was properly prepared before the initial application.

The wax may have been left on for too long or applied in excessive heat. Buff off in smaller sections as you apply, or try using a slightly damp microfiber cloth to remove stubborn haze, followed by a dry buff.