Hairpin Legs - 16" - 2 Prong - 12mm - Silver

Each hairpin leg has a maximum weight capacity of 250kg, ensuring robust support for most furniture projects.

The pack includes 4 x Hairpin Legs (16" - 2 Prong - 12mm - Silver), 4 x Clip-on Protector Feet, 4 x Polymer discs with Ski-Glide technology, and a FREE Screw Pack containing 16 x 20mm screws.

Yes, the raw steel is designed to be finished by you. You can paint, seal, or leave it untreated for an industrial/retro rust appearance.

The polymer discs with Ski-Glide technology screw onto the bottom of the legs. Ensure they are securely attached and clean for effortless gliding.

The pack includes 16 x 20mm screws suitable for most common furniture applications.

Yes, you can use either the clip-on protector feet for standard floor protection or screw on the polymer discs for the Ski-Glide feature. They attach to the same point at the bottom of the leg.

The steel used for these hairpin legs is 12mm thick, providing significant strength and stability.

Ensure all screws are fully tightened. Check that the furniture surface is flat and that the legs are evenly spaced. If the floor is uneven, adjust the protector feet or glide discs if possible, or consider adding shims.

Verify you are using the correct screws (provided) for your material. Ensure the material is thick enough for the screws to gain purchase. For very hard materials, pre-drilling a pilot hole slightly smaller than the screw diameter may be necessary.

Check that the discs are fully screwed in and are clean. Ensure no debris is trapped between the disc and the floor surface. Test on a clean, flat floor.

This is expected for raw, unfinished steel. If you wish to prevent further rust, clean the legs thoroughly and apply a sealant, clear coat, or appropriate paint. If the rust appearance is desired, simply wipe clean with a dry cloth.