Best current price£28.63from B&Q
Shopping.co.uk recommended and popular offers
B&Q£28.63Visit shop B&Q - Valtti Bio Terrace OilBio BasedHigh-Performance Wood Oil (Uv & Weather Protection)Brown1 Litre
Visit shop3 offers from £28.63 - £226.01
View price history by clicking the chart icon.
The Tikkurila Valtti Bio Terrace Oil is designed for homeowners and DIY enthusiasts looking to protect and enhance their exterior wooden surfaces. Its key benefit is providing maximum protection against moisture, dirt, and discolouration, while also preventing wood from cracking. A potential caveat is its availability in a pre-tinted brown colour, which might not suit all aesthetic preferences.
| Model Part Number | Valtti Bio Terrace Oil |
|---|---|
| Brand | Tikkurila |
It is suitable for impregnated wood (pressure-treated wood), hardwood, heat-treated wood, and untreated wood.
No, this oil is not recommended for use on painted surfaces or wood that has been treated with a film-forming coating. It is designed to penetrate the wood.
The frequency of reapplication depends on the exposure and wear of the surface. Typically, maintenance might be needed every few years. Inspect the wood annually for signs of wear.
It means the product incorporates sustainable, plant-derived ingredients alongside other components, making it a more environmentally conscious choice for wood treatment.
The pre-tinted brown colour is specifically chosen to enhance protection, likely due to pigments that offer improved UV resistance and help mask discolouration. It is designed for maximum protection.
Apply when the temperature is between 5°C (41°F) and 30°C (86°F), and when rain or direct sunlight is not expected during application and drying.
Clean your tools immediately after use with water. For the treated surface, cleaning typically involves a mild detergent and water, followed by a rinse.
Ensure the oil was applied thinly and evenly. Wipe off any excess oil that has not penetrated the wood within 15-30 minutes of application. Check for adequate surface preparation and reapply if necessary, maintaining a wet edge.
This can happen if too much oil was applied or if excess was not wiped off. Try to gently remove the excess with a cloth. If the surface is still sticky after drying, it may require light sanding and a reapplication of a thinner coat.
Ensure the wood surface is clean and dry. Very dense hardwoods or previously heavily coated surfaces may resist penetration. Light sanding can help improve absorption. Ensure the temperature is within the recommended range for application.
Preparation: Ensure the wooden surface is clean, dry, and free from old coatings, dirt, and mould. Sand down rough areas if necessary. For previously treated wood, ensure old coatings are removed. Always test the product on an inconspicuous area first.
Application: Apply thinly and evenly with a brush or pad. Work along the grain of the wood. Avoid applying in direct sunlight, during rain, or when the temperature is below 5°C (41°F) or above 30°C (86°F).
Compatibility: Suitable for impregnated wood (pressure-treated wood), hardwood, heat-treated wood, and untreated wood. Not recommended for use on painted surfaces or wood that has been treated with a film-forming coating.
Care: Clean tools immediately after use with water. Maintenance typically involves cleaning the surface and reapplying the oil as needed, usually every few years, depending on exposure. Inspect surfaces annually for signs of wear.
