Kenable Adsl 2+ High Speed Broadband Modem Cable - RJ11 to RJ11 - 2m - White

This cable is designed to transmit data up to 10 times faster (100Mbits/sec) than a standard phone cable, significantly improving speeds and reducing errors on high-speed broadband connections like ADSL 2+.

The most significant improvements are seen on broadband connections of 2Mb/s or higher. While it may offer a slight improvement over a damaged standard cable, its primary benefit is for faster connections.

It uses standard RJ11 male connectors on both ends, which are commonly found on ADSL modems, routers, and telephone wall sockets.

Yes, the cable supports both analogue and digital (DSL/ISDN) applications.

The cable is 2 meters in length.

AWG (American Wire Gauge) size 26 refers to the thickness of the wire. A lower AWG number indicates a thicker wire, and 26 AWG is suitable for the data transmission rates this cable supports.

While it will technically work for a standard phone, its design and higher data transmission capability are optimized for broadband modems. Using a standard phone cable for your landline is usually sufficient.

Ensure both RJ11 connectors are fully seated in the modem/router and the wall socket. Check that the modem/router is powered on and properly configured. Try plugging the cable into a different wall socket if available.

Verify that your broadband plan is indeed 2Mb/s or higher, as this cable's benefits are most pronounced at these speeds. Ensure the cable is not damaged and that the modem/router is functioning correctly. Test with a shorter or different known-good cable if possible.

Check the physical connections at both ends for security. Inspect the cable for any visible signs of damage. Ensure the cable is not routed near sources of electrical interference.