Acerbis Pinlock 70 Lens - Transparent
Best current price£22.97from fc-moto.uk
Best offers
Shopping.co.uk recommended and popular offers
fc-moto.uk£22.97Visit shop Acerbis Men's Clear Transparent Pinlock Lens
Visit shopfc-moto.uk£22.97Visit shop One Offer
1 offer from £22.97
View price history by clicking the chart icon.
Product Information
Full details
The Acerbis Pinlock 70 Lens is designed for adult riders seeking to enhance their helmet's visor performance against fogging. Its primary benefit is superior anti-fog resistance, ensuring clear visibility in various weather conditions. A potential caveat is its specific fitment to Acerbis helmets, requiring compatibility confirmation. This lens offers scratch resistance and a design that integrates seamlessly with the visor's geometry.
All features
| Age Group | adult |
|---|---|
| Gender | Male |
| Model Part Number | 0024266.120 |
| Brand | Acerbis |
Extended Product Information
FAQs
Is the Acerbis Pinlock 70 Lens universal?
No, this lens is specifically designed for compatible Acerbis helmet visors. Always check your helmet's compatibility.
How do I clean the Pinlock 70 lens?
Clean with a soft, damp cloth. Mild soap and water can be used for heavier dirt, followed by thorough rinsing and drying with a soft cloth.
What does 'Pinlock 70' refer to?
'Pinlock 70' refers to a specific generation or performance level of Pinlock's anti-fog lens technology, indicating a high level of fog resistance.
Can I install this on any helmet visor?
No, the lens requires a Pinlock-ready visor. It is designed to fit specific Acerbis helmet visors.
How does the Pinlock system work?
It creates a sealed air pocket between the lens and the visor, acting as insulation to prevent condensation and fogging.
Is the lens removable?
Yes, the lens is designed to be removable for cleaning and maintenance.
Will this lens fit inside my helmet?
The lens fits onto the inside of your helmet's visor, not inside the helmet shell itself. Ensure your visor is Pinlock-ready and compatible with the Acerbis lens.
Troubleshooting
Lens not sealing properly
Ensure the helmet visor's Pinlock pins are fully extended and the lens is correctly aligned. Re-seat the lens, ensuring a firm and even press around the edges.
Continued fogging despite installation
Check that the silicone seal of the Pinlock lens is intact and making full contact with the visor. Clean both the lens and visor. Ensure the air gap between the lens and visor is not obstructed.
Scratches on the lens surface
Minor surface scratches may occur over time. Avoid using abrasive cleaning materials. If scratches significantly impair vision, replacement may be necessary.
Difficulty installing the lens
Ensure you are using the correct lens for your specific Acerbis helmet model and visor. Check that the visor is properly attached to the helmet and that the Pinlock pins are not bent or damaged.
Pros and Cons
Pros
- Significantly reduces visor fogging in cold or humid conditions.
- Scratch-resistant surface maintains optical clarity.
- Designed for optimal integration with Acerbis helmet models.
- Improves rider safety through consistent clear vision.
- Easy to install and remove for cleaning.
Cons
- Primarily designed for Acerbis helmets; compatibility with other brands may be limited.
- Requires a compatible Pinlock-ready visor on the helmet.
- Can add a slight visual distortion for some users if not perfectly aligned.
- May require occasional cleaning to maintain maximum effectiveness.
Setup, Compatibility & Care
Setup:
- Ensure your Acerbis helmet visor is Pinlock-ready. This typically involves small pins on the visor itself.
- Carefully clean both the inside of your helmet visor and the Pinlock 70 lens with a soft, damp cloth.
- Align the silicone bead of the Pinlock lens with the inner edge of the helmet visor.
- Gently press the lens into place, ensuring it snaps securely onto the visor's pins. Check for a tight seal all around.
Compatibility:
- This lens is specifically designed to fit Acerbis helmet visors that are Pinlock-ready.
- Always verify your helmet model and visor specifications to ensure compatibility before purchase.
Care:
- Clean the Pinlock lens regularly with a soft, damp cloth. Avoid using abrasive materials or chemical cleaners, as these can damage the anti-fog coating.
- If the lens becomes heavily soiled, use mild soap and water, rinsing thoroughly and drying with a soft cloth.
- When not in use, store the lens carefully to prevent scratches.